Specifications

dead-end fiber optic cable fitting
1.OEM manufacturer
2.Enough grip strength
3.ISO 9001:2000

dead-end fiber optic cable fitting         

Overhead power line fitting OPGW dead-end fiber optic cable fitting                                        

OPGW Tension Clamp

  

 

OPGW Tension Clamp Components
1	U-Anchor shackle	Hot-dig galvanized steel
2	Paraller plate	Hot-dig galvanized steel
3	Clevis Thimble	Hot-dig galvanized steel
4	Outer armour rods	Aluminum clad steel
5	Inner reinforcing armour rods	Aluminum clad steel
6	Parallel groove clamp	Aluminum Alloy
7	Earth bonding laed	Aluminum

 

OPGW Tension Clamp Order Notice
1	Choose the suitable suspension clamp according to the outer diameter of OPGW cable and RTS.Suitable for long span river,high span valley etc. special place.
2	the quantity configuration : 1 set / terminal line tower,2 sets/strain pole tower
3	the turning direction of inner preformed wire different from the outer ones, the standard configuration is turning right, if turning left,please note it in the contract.
4	suggest to use one time after the clamp afford full strain
5	clamp strength:70KN,100KN,120KN,160KN,210KN,250KN,300KN etc.

 

OPGW Tension Clamp Application

 

 

 

OPGW Tension Clamp Specification
Product type		suitable cable diameter (mm)	Inner reinforcing armour rods		Outer armour rods		color
			length (mm)	rods No.	length (mm)	rods No.
ONF 1000 xxx		9.0 - 10.0	1400	13	900	6	red
ONF 1110 xxx		10.1 - 11.1	1500	14	1000	6	orange
ONF 1220 xxx		11.2 - 12.2	1600	15	1100	6	yellow
ONF 1330 xxx		12.3 - 13.3	1700	16	1200	6	green
ONF 1440 xxx		13.4 - 14.4	1800	18	1300	6	cyan
ONF 1550 xxx		14.5 - 15.5	1900	19	1400	7	blue
ONF 1660 xxx		15.6 - 16.6	2000	20	1500	7	purple
ONF 1770 xxx		16.7 - 17.7	2100	21	1600	8	black
ONF 1880 xxx		17.8 - 18.8	2200	22	1700	8	red

 

Ancillary Connection Hardware

 

 

U-Anchor shackle type	Paraller plate type	Clevis Thimble type		Tensile Strength(KN)		Material
U-7	YL 210 070	NHG-070		70		Hot-dig galvanized steel
U-10	YL 210 100	NHG-100		100		Hot-dig galvanized steel
U-12	YL 210 120	NHG-120		120		Hot-dig galvanized steel
U-16	YL 210 160	NHG-160		160		Hot-dig galvanized steel

  

OPGW Tension Clamp Packing Details
Packing		Packed by wooden case. At the bottom of the case is moistureproof linoleum, then covered with waterproof membrane.
Normal tension clamp factory quantity		Standard quantity is 200 or 300 sets with a tolerance of 5% or other required
Tension Clamp Weight		Approx. 5kg per Set

 

OPGW Tension Clamp Related Products

 

 

OPGW Tension Clamp Certification

 

 

OPGW Tension Clamp Network Access License

 

 

Contact Us

 

 

 We are waiting for your any calling about OPGW Tension Clamp! Thanks!