Specifications

Type 41 cutting wheel
1.Made by brown aluminium oxide
2.Sharp,clean cut
3.Use cutting metal,cast iron
4.Long service time

 

Factory Advantages

 

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

 

2.Locate in the center of China,low and almost same transport costs to any China main port,

 

3.Advanced technique,

 

4.More than 10 years production experience,

 

5.Strict quality testing,good after-sale service,

 

6.ISO9001:2000 certificate,

 

7.Abundant export experience,

 

8.Accept OEM brand,

 

9.Small order is accepted,

 

10.Free samples to test quality. 

 

Raw Materials

 

High hardness abrasive:ensure cutting sharp sex

High quality reinforced net:ensure the security of cutting machine

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

Product:

 

Size(mm)	Size(inch)	Shape	Description(A36#QBF)	Colour	Speed(r.p.m)	Speed(m/s)
115x2.0x22.2	41/2x5/64x7/8	flat	1.Material:Aluminium oxide 2.Grit size:36#, 3.Hardness(1):Q 4.Bonding agent:resin 5.Reinforced net:Two fiberglass nets,two black papers	Black	13300	80

 

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

 

 

Feature:

1.Specially treated AO grain for extended life and fast cut,

2.Imported resin bonded makes our wheel stronger,

3.Two reinforced fiber glass nets makes our disc more strength,

4.Sharpness,more powerful capacity,

5.Extremely precise and straight cutting,

6. Small electric current,workpiece cross section burns lightly, 

7.In good balance,comfortable hand-feeling, 

8.Minimum cutting waste,because of small wheel thickness,reduce cutting dust and noise,

9.Lowest power consumption,outstanding service life.

Usage:

1.It is used for cutting ordinary metal and steel,such as non-ferrous metal,ferrous metal,collared metal, cast steel, steel tube,steel pipe,structural steel,mild steel,harden steel,sheel plate,spheroidal cast iron,cast iron,iron rod,casting etc.

2.used in these industries.

1)Foundries,

2)Machine building,

3)Aerospace industry

4)Constructions,

5)Fabrication shops,steel mills,

6)Ship manufacturing and so on.

Domestic leading molding equipment:ensure the stability of the product performance

Performance testing site:

Cutting result 

Size	Cutting Object	Cutoff Quantity	Efficiency SEC/cutoff	After Cutting Surplus
Φ230×3.0mm	5×5×0.3cm angle iron	10	10	Φ220mm
Φ250×2.0mm	5×5×0.3cm angle iron	20	15	Φ245mm
Φ300×2.5mm	5×5×0.3cm angle iron	20	9	Φ283mm
Φ350×2.5mm	5×5×0.3cm angle iron	20	7	Φ336mm

 

Cautions:

 

1.Do visually inspect all wheel before mounting for possible damage.

 

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

 

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

 

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel.

 

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute beforerinding.

 

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

 

Safety Recommendatio

 

1.Wear protective goggles;

 

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

 

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the discs horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.

Dimension mm	Dimension inch	Speed r.p.m	Speed m/s	G.Weight kg	Dimension L*W*H(mm)	Box Qty
						Piece/ box	Piece/ bigbox
100x2.0x16	4x5/64x5/8	15200	80	23	440x230x215	25	600
100x3.0x16	4x1/8x5/8	15200	80	24	440x230x205	25	400
115x2.0x22.2	41/2x5/64x7/8	13300	80	20	260x260x275	25	400
115x3.0x22.2	41/2x1/8x7/8	13300	80	23	380x260x205	25	300
125x2.0x22.2	5x5/64x7/8	12200	80	19	410x280x155	25	300
125x3.0x22.2	5x1/8x7/8	12200	80	27	410x280x205	25	300
150x2.0x22.2	6x5/64x7/8	10200	80	27	485x330x155	25	300
150x3.0x22.2	6x1/8x7/8	10200	80	26	330x330x200	25	200
180x2.0x22.2	7x5/64x7/8	8500	80	26	390x390x155	25	200