Specifications

1.Made by aluminum oxide
2.Two reinforced mesh,safety
3.Sharp,clean cut action
4.Longer service life
5.Cutting normal steel

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service,

6.ISO9001:2000 certificate,

7.Abundant export experience,

8.Accept OEM brand,

9.Small order is accepted,

10.Free samples to test quality. 

Raw Materials

High hardness abrasive:ensure cutting sharp sex

High quality adhesive-resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

High quality reinforced net:ensure the product use security

Product:

Size(mm)	Size(inch)	Shape	Description(A36#QBF)	Colour	Speed(r.p.m)	Speed(m/s)
125x3.0x22.2	5x1/8x7/8	flat	1.Material:Aluminium oxide 2.Grit size:36#, 3.Hardness(1):Q 4.Bonding agent:resin 5.Reinforced net:Two fiberglass nets,two black papers	Black	12200	80

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Feature:

1.Specially treated Aluminium oxide grain for extended life and fast cut,

2.Imported resin bonded makes our wheel stronger,

3.Two reinforced fiber glass nets makes our disc more strength, 

4.Sharpness,more powerful capacity,

5.Extremely precise and straight cutting, 

6. Super cooling cutting-won”t burn workpiece surface, 

7.No vibration and no bouncing on work place,

8. Minimum of the dust,possess superior abrasion resistance,

9.Lowest power consumption,outstanding service life. 

Usage:

ideal for cutting metal and steel,like general metal,hard metal,sheet metal, ferrous metal,nonferrous metal,iron,angle iron,normal steel,steel sheet,steel bar,steel pipe and so on

these industry maybe use this type wheel

1.investment castings,

2.steel ingotsand bar manufacturing,

nstruction,

4.foundries and allied industry,

5.pipe manufacturing,

6.fabrications

Automatic production line:ensure the stability of our products

Performance testing site:

Cutting result

Size	Cutting Object	Cutoff Quantity	Efficiency SEC/cutoff	After Cutting Surplus
Φ230×3.0mm	5×5×0.3cm angle iron	10	10	Φ220mm
Φ250×2.0mm	5×5×0.3cm angle iron	20	15	Φ245mm
Φ300×2.5mm	5×5×0.3cm angle iron	20	9	Φ283mm
Φ350×2.5mm	5×5×0.3cm angle iron	20	7	Φ336mm

Cautions:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute beforerinding.

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

Safety Recommendatio

1.Wear protective goggles;

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the discs horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.

METAL	NAME	SIZE		SPEC	MAX OPERATING SPEED		BOX  QTY
		mm	inch		m/s	rpm (min-1)
Type-41	PER CUT	100 x 3 x 16	4 x 1/8 x 5/8	A46	80	15,200	400
		115 x 2.5 x 22.23	4 - 1/2 x 3/32 x 7/8	A36	80	13,300	400
		115 x 3x 22.23	4 -1/2 x 1/8 x 7/8			13,300	300
		125 x 2.5 x 22.23	5 x 3/32 x 7/8			12,200	300
		125 x 3x 22.2	5 x 1/8 x 7/8			12,200	300
		180 x 3 x 22.23	7 x 1/8 x 7/8			8,500	100
		230 x 2.5x 22.23	9 x 3/32 x 7/8			6,600	100
		230 x 3 x 22.23	9 x 1/8 x 7/8			6,600	100
		300 x 3 x 25.4	12 x 1/8 x 1	A30	80	5,100	25
		350 x 3 x 25.4	14 x 1/8 x 1			4,400	25