Specifications

Concrete cutting wheel
-Premium silicon carbide
-No vibration&bouncing
-Give clean cut
-Cut concrete,ceramic,hard stone

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service,

6.ISO9001:2000 certificate,

7.Abundant export experience,

8.Accept OEM brand,

9.Small order is accepted,

10.Free samples to test quality. 

Raw Materials

High hardness abrasive:ensure cutting sharp sex

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

High quality reinforced net:ensure the product use security

Product:

Size(mm)	Size(inch)	Shape	Description(C30#TBF)	Colour	Speed(r.p.m)	Speed(m/s)
400x3.0x25.4	16x1/8x1	flat	1.Material:Silicon carbide 2.Grit size:30#, 3.Hardness(1):T 4.Bonding agent:resin 5.Reinforced net:one or two fiberglass nets	Black	3800	80

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Benefits:

1.Premium quality silicon carbide raw material assure high durability,

2.High quality phenolic resion bond,

3.Two reinforced fiberglass nets provide max safe cutting

4.Shortest sec cutting times,efficiency,

5.Provide cool, fast and cleaning cutting,

6.Cutting the meterial with out demage,

7.No vibration and no bouncing on work place,

8.Reduced energy consumption,low noise generation,low dust production,

9.Extended service life,economic,safety,durability,

Applications:

Fast,accurate cutting
All masonry product

Natual and artificial stone
Marble , brick , concrete

Automatic production line:ensure the stability of our products

Automatic production line:ensure the stability of our products

The process of checking the quality:

1.Check the cutting wheel's appearance:

Whether the cutting wheel has attrition on the surface

Whether the cutting wheel has concave point on the surface

2.Check the cutting wheel's diameter

3.Check the cutting wheel's thickness

4.Check the cutting wheel's aperture:

5.Check the cutting wheel's cutting capacity

Performance testing site

Test report:

size	cutting object	cutoff quantity	efficiency      SEC/cutoff	After cutting surplus
Φ230×3.0mm	5×5×0.3cm angle iron	10	10	Φ 220mm
Φ250×2.0mm	5×5×0.3cm angle iron	20	15	Φ 245mm
Φ300×2.5mm	5×5×0.3cm angle iron	20	9	Φ 283mm
Φ350×2.5mm	5×5×0.3cm angle iron	20	7	Φ 336mm

Cautions:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel.

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute beforerinding.

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

Safety Recommendatio

1.Wear protective goggles;

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the wheels horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.

Dimension mm	Dimension inch	Speed r.p.m	Speed m/s	G.Weight kg	Dimension L*W*H(mm)	Packing pcs/carton
100x3.0x16	4x1/8x5/8	15200	80	24	440x230x205	400
115x3.0x22.2	41/2x1/8x7/8	13300	80	23	380x260x205	300
125x3.0x22.2	5x1/8x7/8	12200	80	28	410x280x205	300
150x3.0x22.2	6x1/8x7/8	10200	80	27	330x330x205	200
180x3.0x22.2	7x1/8x7/8	8500	80	20	390x390x110	100
230x3.0x22.2	9x1/8x7/8	6600	80	16	490x250x115	50
250x3.0x25.4	10x1/8x1	6100	80	10	260x90x260	25
300x3.0x25.4	12x1/8x1	5100	80	14	310x90x310	25
350x3.0x25.4	14x1/8x1	4400	80	18	360x90x360	25
400x3.0x25.4	16x1/8x1	3800	80	24	410x90x410	25
400x3.0x32.0	16x1/8x1 1/4	3800	80	23	410x90x410	25