Sand/ Shot/ Grit/ Abrasive Blasting Cabinet 

This machine is suitable for cleaning sand in the casting residual sand surface of casting clay, iron and other impurities and cleaning profiles, pipes and iron surface rust and others. It's more suitable for cleaning high difficulty of rugged piece, and can also clean the forging and heat treatment, welding parts. The abrasive in tank body (steel shot, sand) is high-speed spraying by sandblasting pipe under the action of compressed air, and the abrasive media is spraying to the workpiece surface and impact grinding, remove debris, and this machine object appearance, durable.

This Sand/Shot Blast is powered by compressed air, the projectile is accelerated to 50-60m / s and impact to the surface of a non-contact, less polluting surface treatment method, it has arranged flexible, easy maintenance, one-time investment less, etc., and therefore numerous structural parts manufacturers favor it.

1) Doors:

The service door is built in welded profiles and has a closing in steel plates, and is internally coated with abrasion resistant rubber. An exclusive sealing system prevents the loss of abrasive materials and makes the closing of the doors possible, without effort. Optionally, two doors can be supplied (tunnel type room) and one door for the operator. Sensors connected to the doors automatically interrupt the blasting operation when one of them is opened.

2) Luminaries:

Each LED lamps construction and positioning enable maximum utilization of the luminosity. The fastening system allows easy removal, for maintenance.

3) Working chambers: Built in color steel tile, they are modulated in order to satisfy any dimension in height, width and length. Inside (except on the ceiling) there is a rubber coating that protects them against abrasion and helps in the acoustic insulation.

4) Horizontal transportation of abrasive material:

This system combines the drive of scraper carts that conduct the abrasive material to the center of the working chamber, where it is collected by a screw conveyor (in some cases by a belt conveyor) which conducts the abrasive material up to the foot of the bucket elevator (abrasive materials purifier). On the whole floor surface, there is a grid that is covered with a perforated plate, which retains larger impurities or even small parts which may drop accidentally on the floor. This unique system used by CMV requires a much smaller installed power that the other systems, thanks to the friction coefficient (wear), which is much smaller in this system.

5) Control panel:

Mounted on a shielded cabinet, it has thermal protection and interlocking for the motors, which makes it impossible to connect them in the incorrect order. Optionally, it is supplied with a PLC for the automatic control of the equipment. It meets the most important international standards, among which the 60204-1 of the EEC.

6) Blasting machine:

It has a pressure vessel built in accordance with the EU standard, which is hydrostatically tested to operate at a pressure of 8 Bar (116PSI), with and outlet for one or more operators, with a remote pneumatic command and a full kit for the protection of the operator(s), and an air filter that is appropriate for human breathing. The machine also has a high-efficiency pneumatic system and high-performance nozzle(s). Optionally, it can be equipped with a level sensor for automatic feeding of abrasive material.

7) Abrasive materials purifier / Bucket elevator:

The bucket elevator receives the abrasive in its hopper and lifts it to the purifier. The elevator features buckets in nodular cast iron that are highly resistant to abrasion and is driven by one gear motor. The abrasive materials purifier receives the abrasive material from the bucket elevator and, with a system that is adjustable through counterweights, forms a curtain with the abrasive material, through which an air stream passes, which is also adjustable, and which takes the dust and other residues that may be contaminating the abrasive material, to the exhaust system. The abrasive material, now free from impurities, drops into the silo that is located on the blasting machine. Optionally, the abrasive materials purifier can be supplied with a revolving screen.

8) Exhaust system:

The combination of deflectors for air intake / outlet ensures an excellent operational visibility, and, due to their construction, eliminates the waste of abrasive material. Our model BMF-H dust collectors have cartridge filters with elements in Viledon(r), which, besides ensuring an extremely low volume of residual dust (approximately 2mg/m3), have a considerably long useful life (approximately 15,000 h of work). The cleaning of the filter system is done automatically by an electronically controlled pulse-jet system. Optionally, among other items, it is possible to supply the equipment with a noise damper / rear HEPA type filter, thus obtaining a volume of residual dust of about 0.4mg/m3.

Sand blasting process 

Pre-Engineered Blast Booths (PEB) feature the essentials of blast rooms at a fraction of the cost. These ten-foot-High booths not only include the hardware required to strip large parts fast. They also reclaim media, remove dust and breathe fresh air into the work enclosure with Empire's exclusive Booth Ventilation System (BVS).

Available in five sizes, these booths ship flat and can be assembled by three people using a forklift or scissor lift in two days. Because the PEB bolts together and requires no excavation, it can be disassembled and set up at a new site in less than a week.

All PEB parts-ranging from the central blast and recovery system to pre-wired electrical connections and 14 gauge wall panels-come from QINGZHU, where they have been engineered and built to work in harmony. This assures balanced performance between components and provides users with a single source of responsibility for overall system performance.

Production work area

Factory in the working area covers an area of 230 hectares, workshop actual usable floor area of 130 hectares, a total of more than 300 employees, 35 domestic top engineers, the company produces tightly organized, pragmatic innovation, beyond the self, the pursuit of the perfect product is our company's development philosophy, is the most the right people with the best talent concept of our company

 The Production Workshop

Production workshop all adopt the mechanical automatic integration, using computer control strictly, in order to achieve the perfect polishing castings

In order to give you the suitable machine , pls provide below message for us :
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?) 
4. The power supply you need( Our China :380V, 3PH, 50HZ)  
5. Better to send us the workpiece photo or drawing.

Customer visit

FAQ

Q: What standards are you carrying out for your products?

A: We produce according to the ISO9001 and ISO14001 rules.

Q: How to install the machine?

A: We will arrange 1~2 engineers to your factory to guide installation and assembly.

Q: What’s your international market?

A: We Have exported to about 40 countries and regions all around the world, such as, the USA, France, Singapore, Australia,    Middle East, Brazil, Peru and so on.

 Q: What’s your productivity?

 A: We have three production lines for steel shot and steel grit production, one work shop for steel cut wire shots, and one workshop for stainless steel shot and Aluminium shot and so on.

Our service                                                                                     

1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine & Molding Machine & Core Shooting Machine for more than 40 years, competitive with good quality.
7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.
If the above model is not suitable for your workpiece, please tell us your need and then we can send you the most satisfying drawing.

Why choose us ?

Our company has passed ISO 9001:2008 certified,we can offer OE service

Welcome to contact us or visit our company.  

 Payment of the goods should be sent in USD or RMB on the basis of goods Values. We accept payment of T/T, Western Union, Money Gram, PayPal and cash only

2.Shipment

How long will it take to deliver goods?

We will deliver the goods within 3-5 days for spare parts, other goods maybe take a little more times to test and prepare, we will deliver the goods within the deadline which both parties agreed.

What kind of packaging you offer?

We will pack the goods well with exporting packages to make sure all goods in a good condition during storage and delivery.

What kind of transportation methods you offer?

A.We always use express delivery like DHL, UPS, FedEx, TNT and EMS, as we enjoy perfect discount in these companies. But if buyers provide us accounts of their own, transportation fee paid by such accounts are also welcomed.

B.We also always transport by air and sea for the goods with large quantity, and we will confirm freight with buyers' prior delivery.

How about the insurance during transportation? How to deal with the responsibility?

Buyers should take the full responsibility for shortage of goods if the goods are checked by any custom during transportation. During transportation, if goods are missed because of having been detained by custom in China, all loss thus occurred should be borne by us; if missing or detained of goods are occurred in other country except China, all loss should be borne by buyers

What Locations can you ship to?

We can send the goods to the whole world if the express way can deliver it.