PMW-5000 coiled wire shot blasting machine has high cleaning efficiency.By changing the box-type external shot blasting chamber of the wire shot blasting machine into a built-in shot blasting chamber, the projectiles hit the wire workpiece at close range.

main feature:

1. High cleaning efficiency.By changing the box-type external shot blasting cleaning chamber of the wire shot blasting machine to a built-in shot blasting cleaning chamber, the projectiles hit the wire workpiece at close range, thereby greatly increasing the cleaning and rust removal efficiency and effect, and solving the problem The original technology has problems such as low projectile utilization rate, slow cleaning speed, and it is not easy to be connected to other equipment for use.

2. Good sealing effect.Taking into account the situation of projectiles flying during the shot blasting cleaning process, the wire shot blasting machine produced by our company is equipped with a multi-layer resin rubber curtain and a sealing brush sealing box at the entrance and exit of the workpiece in the shot blasting room. That is, when the workpiece reaches the Before cleaning at the cleaning station, resin sheets and brushes seal and cover the splashing projectiles inside the chamber, effectively blocking the projectiles from escaping from the inside of the chamber.

3. Safe, environmentally friendly and pollution-free.The dust collector, elevator, bottom screw conveyor, access door, etc. of the wire shot blasting machine produced by our company are all interlocked with the opening of the shot blasting machine. Only when the shot blasting machine is opened in sequence and runs smoothly and reliably can the shot blasting gate be opened. Open, the projectiles in the separator continuously enter the shot blaster, are thrown out by the high-speed rotating blades, and hit the surface of the wire, cleaning off the oil dirt and rust on the surface of the wire, and the wire shows a bright metallic luster.It realizes the functions of rapid transportation of wire workpieces and continuous feeding, unloading and shot blasting. The successful development of this equipment has changed the problem of fastener companies that cannot control the air, groundwater and other environmental pollution caused by the use of pickling for rust removal. But the current situation of environmental impact assessment.