Function and Features:
Decribtions: This product is Chun nine company-wide series of standard shot blast equipment. Depending on the workpiece can be non-standard design and manufacturing, to achieve plant load test, after the technical indicators meet the factory. Shot by strengthening, can greatly improve the surface hardness of parts, can improve the internal stress of the workpiece, to strengthen the purpose of improving the fatigue strength of the workpiece; also remove other workpiece surface rust, etc. (see right). ZJ044 machines have a variety of types, suitable for the top surface of the projectile from the side of the workpiece, such as rods, gear shaft, spur gear, diaphragm clutch, bevel gear; may be simultaneously ejections from the side and the top surface of the workpiece or two table blast wheel segments simultaneously ejections from the side of the workpiece.

Process:
1. Preparation: First of manual control for electrical vibration sieve to separate the projectile (which elevator opened); then the work manually each small turret workpiece full.
2.Shot Strengthening:
① Dust Blower → elevator → shot blasting open open open → → rotation for two gas control pill gates open → Blasting begins. Shot blasting is a period of time.
② Pills for two pneumatic brakes off → large turntable drive cylinder open. A large rotating turret station after → two air control pill for gates open (while the drive cylinder return, the operator at the unloading station for loading and unloading of the workpiece).

③ Shot Blasting continues for some time. Recycled to step ② to continue working. In the above operation, the use of automatic process control PLC for control pill valve electronically controlled gates open, vibration sieve separation of the projectile. After the work is completed, dust cleaning system.

We will be responsible for transport and devirely.

If we can help you in any way,please don't hesite to contact us.