Product Application

The tilting drum type shot blasting machine is one of our latest research and development of standard series shot blasting cleaning equipment.This machine can be used to clean the easy flip workpiece,not easy to crashing of the brittle parts and not deep core of casting, forging and welding parts, remove the sand on the surface and oxide.The whole machine adopts PLC control, it is with high degree of automation,it both can stand-alone work, and also can wiring using.

Main Features

1.The machine adopt the straight association-like shot blasting machine, has the characteristics of long service life, simple structure.

2. Use BE type separator, good separation effect and higher productivity, to improve the blade life have a positive effect.

3. Uses the bag filter, dust emission concentration lower than the standards stipulated by the state, to improve the workers' labor environment.

4. Uses the steel plate drum, reduces the workpiece collisions, damage phenomenon, reduces the noise in the machine.

Cradle roller consists of the following components:
1The cleaning chamber
From both sides of the thick steel plate coupling into the chamber body through the intermediate square tube steel. Mainly used to carry the drum and the drive. Action coupling cylinder drum cleaning process to achieve shaken up and down, so that the workpiece is sufficiently stirred to clean.
2 Cradle body
The steel plate welded into the outer cone barrel, the middle roll band have lined abrasion resistant polyurethane sheeting, wear board has flipped workpiece rib, bottom opened a lot of holes, bullet and clean up the scale, sand, flash etc from leaking through this hole after the upgrade separation.
3 Cradle drive
There are two central drum hanging plastic roller support, the rear is a rotation center of the spherical bearings. Driven by the idler gear to drive the drum rotation.
4 Enclosure
Roller cover the entire opening of the sealed package to prevent splashing projectiles and projectile recovery and clean up the scale, sand, burrs, etc., in order to separate recycling.
5 Cradle reversing mechanism
The entire mechanism is controlled by a hydraulic system. Cylinder by cylinder to realize the operation of the lid opening, closing and barrel cleaning process of shaking up and down.

Quality and After-sale Assurance:
1. Supplier promise the name, model, specification and quantity comply with technical protocol,
assuring the machine is new equipment with qualified material manufactured through perfect technology.
There are no defects in design, material and technologies, which is suitable for propose of demander,
and meets the standard of national industry. The quality is stable and reliable.

2. Equipment warranty and After-sale Assurance Engineers available to service machinery overseas
( except force majeure, inappropriate operation and the quick-wear parts wears).

3. The equipment will pass the installment and test before delivery, after the quality is qualified.

_{In order to give you the suitable machine , pls provide below message for us :}
1.What is your workpiece and the material and the shape.

2.The Max.Length/Width/Height of the workpiece and the MAX./MIN.Weight of your workpiece.

3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?).

4.The power supply you need( Our China :380V, 3PH, 50HZ).

5.Better to send us the workpiece photo or drawing.