Specifications

auto sealant
1.general purpose, grey paste
2.good thixotropy,easy to inject
3.replace any gasket instantly

(1) General purpose grey gasket maker, can form to any shape and make almost any gasket instantly.

(2) Neutral, flexibility, good thixotropy, easy to inject, no toxic or irritating gas, good performance in oil,water and gas tolerance.

(3) High-temperature work up to 280°C, no dripping on elevation coating, it resist any cracking, shrinking and corrosion after cured.

 

Typical Properties:

Appearance	Grey thickness paste
Vulcanized Type	De-ketone-oxime type
Initial Cure Time	10~30 min (25°c)
Full Cure Time	1~2mm bead/day
Temperature range	-60~280°c
Pressure resistant (25°c)	12mpa
Shelf life	12 months

 

 Applications:

Sealing and anti-shaking of mechanical parts in high-grade cars, autocycles, ships, etc. also, can seal in high-temp fields, like in machinery, electronic, chemicals, and hardware, etc.

 

User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease;
2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size;
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. Completely surround all bolt holes;
4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5. Silicone dries to touch in 1 hour and start to bond after 24 hours to fully curing.

 

Notes:
A) Keep away from children prevent their touching

B)  Using in place with full ventilate, and store in dry and shade place.

C) Replace the cap after using