Kafuter Grey Liquid Auto RTV Silicone Gasket Maker Grey Color
USD $1.5 - $4 /Piece
Min.Order:2000 Pieces
Guangdong Hengda New Materials Technology Co., Ltd.
Kafuter clear liquid silicone gasket maker black rtv silicon sealant gasket maker
Kafuter Black RTV Silicone Gasket Maker Car Color Maker Gasket Maker Black
Kafuter silicone gasket maker black rtv silicone gasket maker
Kafuter Silicone Bread Maker Black RTV Silicone Gasket Maker
Kafuter grey silicne gasket maker rtv silicone gasket maker grey color
Kafuter Grey Liquid Auto RTV Silicone Gasket Maker Grey Color
Characteristics:
High-classified silver gasket maker, neutral, fast cure, environmental, no-dripping gel formulation, no toxic, corrosion and shrinkage, excellent gas, water, oil-sealing and aging resistance, easy to assembly for next maintenance, temperature range: -60°C to 300°C, endure pressure of 12mpa. Apply in the places which need requirements on fast-sealing, especially bond in the different transported tools in order to develop its work efficiency.
Typical Properties:
Appearance | Silver thickness paste |
Curing Type | de-ketone-oxime |
Initial Cure time | 10~30min(at room temperature) |
Deep Cure time | 1~2mm bead/day |
Temperature Range | -60~300°c |
Pressure Tolerance | 12mpas |
Shelf Life | 12 months |
Applications:
Fast sealing and anti-shaking of engines, water pumps, valve covers, oil sumps, gear boxes, thermostats in high-grade cars, imported cars, motor vessel, etc. also, fast-sealing of high-temp fields, such as, in hardware, machinery, electronic, and chemical equipments, etc.
User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing.
Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it wll release some acid odor when assemble the parts, so using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid it curing inside the tube
4.Keep away from children prevent their contacting.
Packing Specifications:
55g/tube | 100tube/case | 200tube/carton |
85g/card | 25card/case | 100card/carton |