Specifications

uv coating for glass
1.one part,flexible liquid
2.for metal to glass bonding
3.cure under UV/V Lamp
4.50ml/bottle

  kafuter K-302 UV glue uv coating for car window uv coating for glass                  

                                    ( For glass to metal/glass to glass bonding)

  

Application: 

Using in glass with metals bonding, excellent bonding of glass, crystal, and metals like aluminum, carbon steel, stainless steel, and galvanized sheet steel, etc.

 

Typical Properties:

Test Item	UV Adhesive/UV Glue K-302
Viscosity	600±100 mpa
Appearance	colorless or pale yellow liquid
Set Time	6s/high flourescing light 10s/ UV light
Cure Time(s)	200s/high flourescing light 300s/UV light
Harness(Shore A)	69
Elongation at Break(%)	120
Shear Strength	>10mpa

 

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-302 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

 

 

 

Packing Specifications:

10ml/bottle	10bottle/box	100bottle/case
50ml/bottle	10bottle/box	80bottle/case
250ml/bottle	10bottle/box	40bottle/case