Specifications

uv adhesive
1.one part,flexible liquid
2.for metal to glass bonding
3.cure under UV/V Lamp
4.250ml/bottle

                  Kafuter K-302 Metal to Glass UV Curing Glue UV Adhesive

                      ( For glass to metal/glass to glass bonding)

 

Characteristics:

UV light curing adhesive is one-part, high intensity, uv curing modified acrylic adhesive.

(1) general purpose, good storage abilitiy, and have great adhesion to glass, crystal, and metals.

(2) Especially for small area of metal to glass, and glass to glass bonding.

 

Application:  Using in glass with metals bonding, this glue can bond glass, crystal to metals like aluminum, carbon steel, stainless steel, and galvanized sheet steel, etc.

 

Typical Properties:

Test Item	UV Adhesive/UV Glue K-302
Viscosity	600±100 mpa
Appearance	colorless or pale yellow liquid
Set Time	6s/high flourescing light 10s/ UV light
Cure Time(s)	200s/high flourescing light 300s/UV light
Harness(Shore A)	69
Elongation at Break(%)	120
Shear Strength	>10mpa

 

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-302 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

 

 

Notes: 

1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.

2.For best peformance bond surfaces should be clean and free from grease.

3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.

 

Packing Specifications:

250ml/bottle

10bottle/box

40bottle/case