Name: China Manufacturers Kafuter Acrylic d-limonene Adhesive
Brand: kafuter
Availability: InStock

Product Details

Specifications

d-limonene
1.strong bonding, quick set
2.can bond many substrates
3.Packing:80g/card
4.shelf life:12 months

China Manufacturers Kafuter Acrylic d-limonene Adhesive

(Especially bonding the hard-plastics)

Main Characteristics:

Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.

Application:

Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.

Technical Properties:

Appearnce	A: Green viscous liquid B: Red viscous liquid
Viscosity(cps, 25°c)	A: 4000±500 B: 4000±500
Cure Time(min. 25°c)	≤ 5
Tensile Strength(steel×steel.mpa)	≥18
Impact Strength(kJ/m³)	≥10

Packing Specifications:

16g/card	50card/box	200box/carton
16g/tube	100tube/ box	200box/carton
80g/card	50card/ box	100box/carton
80g/tube	100tube/case
2kg/pairs	20kg/case

Directions:

1.The uncoated surfaces should be clean and dry.

2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)

3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5~10 min at room temperature, after 10~30 min, it get working strength.

4.This product can be used at any temperature between -60°c~200°c

Attention:

1.Keep out of reach of children.

2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.

3.Store in dry and cool place, keep away from heating and fire.