High Reliable Excellent Performance IMU Sensor From Shenzhen Manufacturer

1. Introduction

IMU5220 is a reliable solid inertial measurement unit.Built-in triaxial silicon gyroscope,
triaxial silicon accelerometer and GPS receiver, and through three-axis turntable precised
calibration to meet the performance requirements of different conditions. Data fusion to be
realized through the built-in DSP extend Kalman filtering , can give real-time, accurate carrier
posture and sensor data .

2. Application range

•  Small UAV
•  Platform stability and targeting
•  COTM
• Posture monitor

3. Features

1) Good performance in vibration environment.
2 ) Accurate calibration of the gyroscope zero, zero temperature coefficient, sensitivity,
temperature coefficient of sensitivity, orthogonality error and the acceleration
effect ,accelerometer zero, zero temperature coefficient, sensitivity, temperature sensitivity
coefficient and the orthogonality of the error.
3) 500Hz Rapid calculation, high speed sampling to ensure movement detail calculation,
restrain aliasing, improve signal-to-noise ratio.
4) The highest rate of packets is250Hz,RS232 interface .
5) Low power consumption:Typical 0.07A (12V).

4. Use and installation instruction

1) The power should be 5 to 13VDC, ripple < 50 mv, current at least 0.5 A, if the power
supply noise is bigger and power supply circuit is longer, please use the filter or external
voltage regulator.
2) IMU use M3 cup head screws on the carrier, the loose will affect the accuracy of
measurement in the process of operation.
3) Advise IMU to be placed static when first power on within 30 seconds , complete
self-inspection and initial alignment process. If carrier has any movement when first power on ,
will delay the time of initial alignment convergence .
4) If possible, try to install in the vehicle center of gravity or near the center of gravity position.
5) Try to avoid violent vibration, temperature change (e.g., installed beside the engine), when it
is necessary to use shock absorbers.
6) As far as possible aim at IMU coordinate axis and the carrier coordinate axis.

5. Working mode and packet format

IMU5220 Working mode :GPS assist vertical gyro mode( VG). Output Roll angle ,pitch
angle, Kalman filtering revised gyroscope angular velocity and acceleration.
IMU5220 work in VG mode : output command through series port 

Our Company & Workshop View :

Certificates & Test Reports :

We can offer :

•  Reliable high quality products and services 
•  Perfect whole system application solution 
•  Strong technical support before or after sales service 
•  Extend strong sales teams & distributors global 
•  OEM products as buyer's requests 

 Our main products :

• Single/Dual-axis High accuracy Inclinometer (digital , current , voltage, CAN output type etc.  )
•  2D / 3D Electronic Compass Sensor (RS232, RS485,TTL output, etc.)
• 1-Axis , 2-Axis, 3-Axis Accelerometer (digital , current , voltage output, etc.)
• 1-Axis , 2-Axis, 3-Axis Gyroscope((digital , current , voltage output, etc.)
• Single /Dual / Three-Axis Angular Gyro Sensor (RS232, RS485,TTL output, etc.)
• High performance MEMS Mini AHRS ( Attitude Heading Reference System ) 
• Other Agent Products PNI...etc

Order Process :

Before order pls contact us for confirm detailed informaiton such as model ,price ,lead time ...etc .

Payment ways :

T/T, WU or Paypal;

Delivery methods & Time :

DHL takes 3-5days ,  Fedex takes 2-7 days , UPS takes 3-7day , EMS takes 10-25days ;

Quality Policy :

We gurantee 1 year in free charge .

Storage :

Note usually we don't make any items in stock , samples customize time need around 3-7days .

Other more information please visit our website :