Tactical Grade Inertial Measurement Unit STIM300 IMU Factory Calibrated 

Desc. 

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit (IMU).

It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers.

The IMU is factory calibrated and compensated over its temperature operating range.

STIM300 is a cost effective ITAR free solution for systems that only had FOG's as an alternative when reaching for the performance level of that STIM300 can offer.

Features 

• Weight: <0,12 lbs (<55g)
• Volume: <2,2 cu. in. (35cm3)
• ITAR free
• Insensitive to magnetic fields
• Solid state - high reliabilit
• Low gyro bias instability (0.5°/h)
• Low gyro noise (0.15°/√h)
• ±10g acceleration input rang
• Low accelerometer bias instability (0.05mg)
• 3 inclinometers for accurate leveling
• Compensated digital output, RS422
• Customer configurable output format, sampling rate and filter settings
• Auxiliary input

Application 

The STIM300 IMU is well suited for stabilization, guidance and navigation applications in Industrial, Aerospace and Defense markets.

It is a crucial building block for inertial navigation systems in UAVs, AUVs, AGVs, UGVs and ROVs.

STIM300 is also used for camera turret stabilization and for use in various handheld devices that require a small IMU to secure operations during GPS outage.

Performance 

Each axis is factory-calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements.

The unit runs off a single +5V supply and communicates through a standard RS422 interface.
For advanced users, STIM300 may be put in Service Mode.

In this mode all the configuration parameters can be intermediately or permanently changed by overwriting the current settings in the flash memory.

Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.
The STIM evaluation tool offer easy measurement and configuration access for STIM gyro modules and IMUs.

The tool support data sampling at alternative rates, graphical data presentation and data log to file for up to two gyro modules/ IMUs in parallel.

RS422 interface for PCI, necessary cabling and PC software is included in the evaluation tool.

Our Company & Workshop View :

Certificates & Test Reports :

We can offer :

•  Reliable high quality products and services 
•  Perfect whole system application solution 
•  Strong technical support before or after sales service 
•  Extend strong sales teams & distributors global 
•  OEM products as buyer's requests 

 Our main products :

• Single/Dual-axis High accuracy Inclinometer (digital , current , voltage, CAN output type etc.  )
•  2D / 3D Electronic Compass Sensor (RS232, RS485,TTL output, etc.)
• 1-Axis , 2-Axis, 3-Axis Accelerometer (digital , current , voltage output, etc.)
• 1-Axis , 2-Axis, 3-Axis Gyroscope((digital , current , voltage output, etc.)
• Single /Dual / Three-Axis Angular Gyro Sensor (RS232, RS485,TTL output, etc.)
• High performance MEMS Mini AHRS ( Attitude Heading Reference System ) 
• Other Agent Products IMU...etc

Order Process :

Before order pls contact us for confirm detailed informaiton such as model ,price ,lead time ...etc .

Payment ways :

T/T, WU or Paypal;

Delivery methods & Time :

DHL takes 3-5days ,  Fedex takes 2-7 days , UPS takes 3-7day , EMS takes 10-25days ;

Quality Policy :

We gurantee 1 year in free charge .

Storage :

Note usually we don't make any items in stock , samples customize time need around 3-7days .

Other more information please visit our website :   

Now please contact us through below methods for your any requirement or comments  !

Contact person : Ms kity(sales)

SHEN ZHEN RION TECHNOLOGY CO.,LTD