3D Digital Magnetic Compass Sensor With High Precision Heading 360deg Measurement
Description:
HCM505 is a high accuracy 3-Axis digital compass with 360°Dip angle compensation. Which uses advanced algorithms, with hard iron and soft iron corrections, to provide highly accurate heading information over its extra wide tilt range at latitudes up to 360°. The small size and low power requirements of the HCM505 allow it to fit into today’s size sensitive systems. These advantages make RION Corporation's HCM505 the choice for applications that require highest accuracy and performance anywhere in the world.
Features include an extra wide tilt range, high accuracy compass heading, low powerconsumption, large signal noise immunity under all conditions, and a large magnetic field measurement range in a small package.
The HCM505 combines USA patented Magneto-Inductive (MI) sensors and measurement circuit technology with a three-axis MEMS accelerometer for unparalleled cost effectiveness and performance. The magnetic sensors and accelerometers are calibrated to operate from -40 to 85°C; hence the measurement is very stable over temperature and inherently free from offset drift.
HCM505 adopts high-tech levels such as MCU, Water-proof, dust prevention and anti-corrosion PCB, import cable,wide temperature metal-clad ,and so on, to improve the stability and reliability.
Features:
- Heading accuracy: 0.3°~0.5°
- Roll angle measuring range :±180°
- Tilt angle resolution: 0.1°
- Tilt angle accuracy: 0.2°
- With hard magnetic ,soft magnetic and angle compensation
- Size: L113×W20×H20mm
- Standard RS232/RS485/TTL output interface
- Wide temperature : -40°C~+85°C
Applications
- High performance ROV navigation
- GPS system integration
- Vehicle tracking
- Remote terrestrial antenna direction indicators
- Sonar targeting systems
- 3-axis magnetic field sensing
- survey equipment
- Autopilot
- Satellite positioning Search
- Robotic systems
Technical Data
Compass heading parameter | The best heading accuracy | 0.3° tilt <10° |
|
| 1.0° tilt <180° |
| Resolution | 0.1° |
Compass tilt parameter | Pitch accuracy | 0.1°<15°(Measuring range) |
|
| 0.1°<30°(Measuring range) |
|
| 0.1°<60°(Measuring range) |
|
| 0.2°<90°(Measuring range) |
| Pitch tilt range | ±85° |
| Roll accuracy | 0.1°<15°(Measuring range) |
|
| 0.1°<30°(Measuring range) |
|
| 0.1°<60°(Measuring range) |
|
| 0.2°<180°(Measuring range) |
| Roll tilt range | ±180° |
| Resolution | 0.1° |
Calibration | Hard iron calibration | Yes |
| Soft iron calibration | Yes |
| Magnetic field interference calibration method | 24 points(3D calibration) |
Physical features | Dimension | L113×W20×H20mm |
| Weight | 20g |
| RS-232/RS485/TTL interface connector | 5PIN connector |
Interface features | Start delay | <50MS |
| Maximum output rate | 20Hz/s |
| Communication rate | 2400 to19200baud |
| Output format | Binary high performance protocol |
Power | Power supply | (Default)DC+5V |
|
| (Customized)DC9~36V |
| Current(Maximum) | 20mA |
| Ideal mode | 18mA |
Sleep Mode | TBD |
Operating range | -40℃~+85℃ |
Storage temperature | -40℃~+100℃ |
Resistance shock performance | 2500g |
According to EN61000 and GBT17626 | |
≥40000 hours/times | |
≥100M
| |
100g@11ms,3Times/Axis(half sinusoid) | |
10grms,10~1000Hz | |
80g(without cable) | |
Our Company & Workshop View :
Certificates & Honors :
We can offer :
- Reliable high quality products and services
- Perfect whole system application solution
- Strong technical support before or after sales service
- Extend strong sales teams & distributors global
- OEM products as buyer's requests
Our main products :
- Single/Dual-axis High accuracy Inclinometer (digital , current , voltage, CAN output type etc. )
- 2D / 3D Electronic Compass Sensor (RS232, RS485,TTL output, etc.)
- 1-Axis , 2-Axis, 3-Axis Accelerometer (digital , current , voltage output, etc.)
- 1-Axis , 2-Axis, 3-Axis Gyroscope((digital , current , voltage output, etc.)
- Single /Dual / Three-Axis Angular Gyro Sensor (RS232, RS485,TTL output, etc.)
- High performance MEMS Mini AHRS ( Attitude Heading Reference System )
- Other Agent Products PNI...etc
Order Process :
Before order pls contact us for confirm detailed informaiton such as model ,price ,lead time ...etc .
Payment ways :
T/T, WU or Paypal;
Delivery methods & Time :
DHL takes 3-5days , Fedex takes 2-7 days , UPS takes 3-7day , EMS takes 10-25days ;
Quality Policy :
We gurantee 1 year in free charge .
Storage :
Note usually we don't make any items in stock , samples customize time need around 3-7days .
Other more information please visit our website :