Product Details

Sheep feet head dehairing machine

PURPOSE
The scalding – and hair – removing machines type 650P, 760P, 770P, 870P and 970P are for scalding and removal of hair from calf, cattle and sheep feet and heads, and for the cleaning and removal of hair from whole piglets.
The small model 650P suits the processing of calf, cattle and sheep feet as well as sheep heads and calf heads with a weight of not more than approx. 8 kgs.

PERFORMANCE
The hair-removing machines enable in only one single operation the entire processing of calf feet and whole piglet while the remaining items would undergo an additional finishing treatment.

IMPORTANT
In order to obtain maximum yield and the highest possible quality of the end-products when producing sheep and cattle feet and calf-heads it is recommended to operate in accordance with the below table, e.g:

-1. When processing sheep feet, and after hair-removal in the hair removing machine the feet should be processed in a refiner for perfect finishing.
-2. Cattle feet should, after the hair-removal in the scalder be placed on a table and singed by means of a butane-gaz blow Torch.To obtain a perfect white finish it is recommended to return the feet for a short while (1 to 1 ½ minutes) to the hair-remover for washing.
-3. For calf heads perform the finishing with a flexible shaft spiral-Knife.

Data Sheet

Length: 1250 1600 1950
Width 1000 1000 1000
Diameter 550 550 550
Power (kW) 4 7.5 10
Voltage (V) 220 220 220
Int. /380V (Amp.) 9.7 16.4 29
Weight (kg) 245 550 860
Volume (m3) 1.5 2.5 3.5
Water consumption
65 ºC (m3/h) 1.2 1.4 1.8
Production 400 Legs/h 800 Legs/h 1600 legs / hour

------------------------------------------

Sheep dehairing machine

1 Product Overview

Sheep flat dehairing machine adopts multi cylinder type structure, four columns supporting the upper and lower two layers of roller. The rotation of the drum drive play hair stick for hair removal of sheep. By the next two layer roller clearance adjustment on the lifting mechanism, sheep hair removal to suit the needs of different, with wide adaptation range, hair removal effect is good, has the advantages of compact structure, beautiful appearance, use, adjustment, convenient repair.

The 2 main uses and characteristics

1), Equipment use

Used for hair removal of after scalding sheep.

2), The characteristics of equipment

A. The machine adopts mechanical transmission, no pollution to the sheep.

B. Smooth operation, long service life.

C. Continuous production, high efficiency.

D. Has the advantages of simple operation, less wearing parts.

3 Applicable range and working conditions

1), Ambient temperature: -10 degrees ~+40 degree

2), Rated control voltage value of 380V + 15% can work reliably.

4 Structure and instructions for use:

1) the working principle: the body has upper and lower two rows of dehairing cylinder tunnel type, the sheep through the import of slide into the machine, the motor drives the roller to rotate play mao. Spurring play hair roller dehairing rod rotation, make into the tunnel quickly rolling sheep sheep, body and hair stick hit the mutual friction, so as to achieve the purpose of hair. Finally, the sheep from the outlet to slip out.

2) must be scalding sheep in the planing machine, ironing effect directly influences the dehairing machine dehairing effect. So according to the different breeds of sheep in different temperature. And sheep and sheep scalding temperature is not the same, need higher temperature sheep. Different seasons will vary.

3) roughening process, spray the body tube in a request to connect50~55DEGREE warm water, in order to ensure the dehairing effect, at the same time can be a sheep body hair, blood, ash and other debris washed.

5.Data sheet