1.2m/1.5m/1.8m width university use lab steel fume hood
USD $800 - $1,800 /Set
Min.Order:5 Sets
Yifeng Clean Technology Jiang Su Shares Co., Ltd.
Lab fume hood
Specification:
1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating.
2.Inside Lining: 4mm thickness of Compact.
3.Worktop: 12.7mm Wilsonart Chemsurf chemical-resistant laminate, install with a hurdle to prevent spillage of liquid.
4.Sash: 6mm of tempered glass.
5.Sash Handle: 2mm Cold-rolled steel powered with epoxy coating.
6.Illumination: with not less than 300 Lux 30W fluorescent lamp set.
7.Cupsink: Oval shaped PP Cupsink
8.Water Tap: Molded in one piece copper water tap, epoxy powder coating surface with a ceramic valve.
9.Exhausting Duct: Anti-corrosion Fiberglass duct.
10.Plinth: With 1.5mm thickness of cold-rolled steel plate, after acid washing, phosphide and “dian yong”, sprayed with good quality anti-corrosion static coating.
11.Technical specification: Noise: less than 60db (International standard)
Face velocity: 0.5m/s
12.Function: With an intelligent automatic delay protection device to exhaust residual corrosion air completely and prolong the service time of fume cupboard.
relate photo
Company and workshop
Client
Connect information
Add: NO.2559 JinShen Road FenHu Development Zone Wujiang City JiangSu Province China |
Tel:+86-512-63206585 63206589 |
Fax:+86-512-63208127 |
Web: |
Skype: leiting1128 |
Connect person : mely |
All of us welcome you to visit our factory !!