Product Details

Product Description

fume hood

1. Chemical Lab Fume Hood (fume cupboard & fume cabinet):

1.Exterior materials: Quality 1.2mm cold-rolled steel construction cabinets finished in 0.5mm safety epoxy enamel perfect for resisting corrosion and heat.

2.Interior materials: All interior surface of fume hoods are made of chemical resistant plate, it was developed to have excellent chemical- resistance and anti high temperature.

3.Sash: The full view vertical raising sash is manufactured of laminated safety glass with the sash set into an extruded, low turbulence PVC track that delivers smooth operation and steady sash positioning.

4.Worktops: Equipped with phenolic resin, epoxy resin, stainless steel board or ceramics to meet your specific needs. 5.Baffles: Made up of three parts, which can make the exhaust controlled and take away.

6.Lighting: 30W lighting and switch, which can make the worktop to have the 450LUX lighting standards.

7.Power: Multi-function power plug.

8.Lab fittings: Equipped remote control valve and cup sink.

9.Exhaust system: The exhaust collar connects the fume hood to the exhaust duct.

10.Depending on the fume hood size, there may be one or two collars of either 200mm or 315mm diameter.

11.Exterior Dimensions: 1200/1500/1800*850*2350mm 12.Air Volume: 1450m3/h (1500*850*2350mm)

Name	Value
Base Cabinet (Optional)	Height is 620mm, the exterior size include the cabinet height
Air Velocity (m/s)	≥0.5m/s
Noise	≤60dB(A)
Pipe Strap	1pc
Fluorescent Lamp	15W*1
UV Lamp	20W*1
Exhaust Duct	PVC, standard length: 4 meters
Blower	Centrifugal fan, speed adjustable. The fan inside the Fume Hood
Glass window	Two layer toughen glass, 6mm thickness; Motor control, height adjustable
Power supply	110-220V/50-60Hz(optional)
Power consumption	800W-1400W
Standard Accessory	Water tap: One Water cup: one Gas tap: two Air tap: one Water proof socket: two
Material	Exterior body :Cold-roll steel sheets, coated with any-bacteria power Interior: Adopts high grade melamine board with good acid and alkali resistance function Work table: Using Solid Chemical-Resistant physiochemical board
Optional Accessory	Filter: 1.HEPA filter 2. Carbon active Filter 3. Chemical Filter
Warranty	One year

Referance picturers

The function of the fume hood:

1) The most important function is extract air, in the laboratory will produce many harmful gas, bad smell, dampness, and the inflammable, explosive, corrosive substances. In order to protect the security of the user, prevent the diffusion of pollutants to the laboratory, in the vicinity of pollution sources to use fume hood. Before we have few fume hoods, so can only use to the experiment which particularly harmful and dangerous gases and produce large amounts of heat.

2) The fume hood has the auxiliary functions of the test bench. Now, considering to improve the experimental environment in recent years, in the experimental stage in experiments gradually transferred to the ventilation cabinet, this request in the fume hood should have the most suitable for the function of the equipment used.

3) Most particularly the new laboratory are required to have air conditioning, so in the construction of the preliminary design stage that the the quantity of the fume hood have been in the plan of the air conditioning system. Because of the fume hood occupies very important position in the biochemical laboratory, from the improvement of laboratory environment, improve the labor hygiene conditions, improving the work efficiency into consideration, such as the use of the fume hood number by leaps and bounds. Followed by ventilation pipes, piping, wiring, exhaust, etc have become the important subject of laboratory

The characters of the fume hood:

The purpose of using the fume hood is discharge harmful gases which is generated in the experiment, protect the health of the researchers, that is to say, for high security and excellent operability, which requires the fume hood should have the following functions:

1) Release function: the fume hood should have the function of absorb the air of outside of the cabinet and dilute the harmful gas produced inside fume hood, and extract it to outside of the room.

2) The function of prevent back flow:the fume hood should promise the harmful air in the fume hood be extracted to outside of the room, not back flow.

3) Isolating function: In front of the fume hood should have the no sliding glass Windows to separate the fume hood outside and inside.

4)Auto-completion:the fume hood should have the ability of suction air from the outside of the fume hood when it extract the harmful air.

5) The function of heat resistance and resistance to acid and alkali corrosion: In the experiments, there will be many poisonous and harmful gas such as acid and alkali with strong corrosive. So the table-board, plate, side panel and the part of the fume hood should antiseptic. And in the semiconductor industry or corrosive experiments such as sulfuric acid, nitric acid, hydrofluoric acid, the fume hoods are also required to overall material must be well protected against acid and alkali, shall adopt stainless steel or PVC materials

Company Information

YIFENG CLEAN TECHNOLOGY JIANG SU SHARES Co.,Ltd.established in 2010, ,clean rooms,automation control and Gas pipeline.We are located in Suzhou City,Jiangsu province, with convenient transportation access and beautiful environment. Two hours’ drive form the Pudong International Airport (PVG).

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including NC Punch,CNC Bending machine,NC Carving machine,Sealing side machine and shearing machine.In addition, we have obtained SGS,ISO9001 certificates and the Outbound bamboo grass products production enterprises.Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Singapore,Nigeria,Cuba,Pakistan, Vietnam,Ethiopia, Kenyan,Bangladesh,Uzbekistan,Fiji.

Packaging & Shipping

Our Services

Q: How about the packing ?
A: With polyfoam inner lining and multi-layer carton box.or polywood case.

Q: What certifications do you have ?
A: ISO9001.ISO1004.TUV . CE

Q: Are you manufacture or trade company ?

A: We are Manufacturer and have over 14 year experience in the laboratory furniture field..

Q: Can you produce the products as I need ?

A: Different Dimensions and styles available.any size and color can customer's made..We can offer OEM.and ODM service

Q: Where your products are exported ?

A: America, Mid East. Africa. Eastern Europe. Central America. South America. Oceania,Australia,Southeast Asia,Korea.

Q: If the production have to been exported to EU.What certification do you have ?

A: The products have all the certification ,including ISO9001.ISO1004.TUV,CE

Q: What is your mini order ?

A: we can offer sample , and welcome to our factory , And about the further detail information ,the sale person will offer you the further information within 12 hours .

Q: Can you offer the free sample and when you can offer the sample ?

A: The sample can be ready for delivery within 10 days and the freight can can be negotiating .

FAQ

1.Payment:

(1) T/T, L/C are acceptable.

(2) Price Term: FOB Shanghai.

2.Pls feel freely to contact us.

(1) Tel:0086-0512-6320-6589

(2)Skype:sophialicaicai

(3)QQ: 2805460938