Specifications

1. Good quality and reasonable price
2. High efficiency
3. Environmental friendly
4. Easy installation

             Protable Split Pressure Solar Water Heater

  

Characteristics:
1. It is not easy to be frozen and cracked down even in hash weather.
2. The shortcoming of bursting of tube or water leakage due to aged rubber ring is eradicated;
3. The water tank is welded scientifically under the high frequency weld and argon-arc weld. The integrated pressurized vacuum tube solar water heater can be directly connected with tap water system to operate automatically with pressure-bearing.
4. Water proof grade: IP *4
5. Hot water can be used directly, or can be used as a pre-heat.
6. Electric heater can be used 1500W or 3000W
7. The standards of vacuum tubes with heat pipe: 14, 16, 18, 20, 24, 30, or 36 units.
8. Water capacity: 100L, 150L, 200L, 240L, 300L and so on
9. Hail resistance: 25mm (diameter)
10. The time of heat insulation: 72h
11. High heat effectiveness: Higher than all glass evacuated solar collector tube by 15

 

	Model	Solar Collector			Absorber   Area(m2)	Capacity(L)	Loading Qty(set)
		Model		NO.			20'GP	40'GP	40'HQ
	CDSP-150-18	CD-5818-18		1	2.3	150	38	76	88
	CDSP-200-24	CD-5818-24		1	3.1	200	28	58	74
	CDSP-250-30	CD-5818-30		1	3.8	250	25	51	55
	CDSP-300-36	CD-5818-18		2	4.6	300	21	43	48
	CDSP-400-48	CD-5818-24		2	6.2	400	17	37	41
	CDSP-500-60	CD-5818-30		2	7.6	500	14	28	32
	Specifications:
	Vacuum tube			15~30 tubes of 58/1800mm heat pipe
	Inner tank			SUS304-2B with thickness   1.5mm-2.0mm
	Outer tank			Galvanized steel alloy with   thickness 0.5mm
	inner copper header			0.8 mm thick red copper
	Outer shell			1.6 mm thick aluminum alloy
	Size of outer case			100mm*112mm
	Bracket			45 degree 1.8mm thick aluminum alloy
	Heat insulation layer			35 mm thick polyurethane foam
	Application			split solar water heating systerm
	Absorption rate			93%~96%
	Certificate			CE, ISO
	Deliver time			within 7 days
	Product contains 3 parts			Pressurized water tank
				Heat pipe solar collector
				Working Station(Including controller, circulation pump, flowing meter, pressure gauge,safety valve, expansion vessel)

 

Working principle:

The water tank is separated from collector. Split pressurized vacuum tube solar water heater is convenient to install and use. It works with pressure up to 0.6 MPa and can normally work in all climates. The absorptive coating of vacuum tube is ALN/ALN-SS/CU. This coating has high absorbing ratio (0.94) and low emission ratio (0.6). The heat efficiency is 0.64. The life span of vacuum tube is 15 years. The vacuum tube is made of borosilicate 3.3. No water in the vacuum tube. Even if some vacuum tubes are broken, the split pressurized vacuum tube solar water heater can normally work.
 

Advantages 

1. Highly efficient absorption of high performance with daily average effciency over 40%-50%

2. Start up quickly heat pipe transfer the heat energy into the storage tank in one condition

3.  With stand pressure of 0.2Mpa,can be connected directly with city water pipe

4. Highly efficient insulation with polyurethane foam

5. Can be used all year round even in the cold weather

6. Automatically controlled

7. Highly heat absorber and less in heat losing