Product Details

compatible with Honeywell wireless panel Wireless recessed door transmitter

Product Description

The WC20 is the industry’s most flexible supervised recessed door/window contact, allowing a multitude of

applications while hiding the transmitter within a door or window frame. The sensor transmits signals

to the control panel or receiver when a magnet mounted near the sensor is moved away from or

closer to the sensor. The WC20 uses a replaceable lithium battery and should last 6 years under

normal usage.

Specification:

Wireless Signal Range	450 ft., open air, with 2GIG or Honeywell Wireless Alarm Control Panel
Code Outputs	Alarm; Alarm Restore; Supervisory; Low Battery
Transmitter Frequency	345.000 MHz (crystal controlled) or other frequency
Transmitter Frequency Tolerance	± 15 kHz
Transmitter Bandwidth	24 kHz
Modulation Type	Amplitude Shift Keying—On/Off Keying (ASK-OOK)
Unique ID Codes	Over one (1) million different code combinations
Supervisory Interval	70 minutes
Peak Field Strength	Typical 16,000 uV/m at 3m
Reed Switch Magnetic Sensitivity	10 to 15 amp turns
Reed Sensitivity	0.625 in. (1.59 cm) minimum gap, 1 in. (25 cm) typical
Magnet Type	Rare earth
Magnet Dimensions (HxD)	0.51 x 0.75 in. (1.3 x 1.9 cm)
Sensor Dimensions (HxD)	2.50 x 0.75 in. (6.37 x 1.9 cm)
Housing Material	ABS plastic
Color	White, Tan or Brown available
Operating Temperature	32° to 120°F (0° to 49°C)
Relative Humidity	5-95% Non-Condensing
Battery (included)	One (1) CR2 (CR15270), or equivalent Lithium battery
Battery life	6 years (on normal condition)
Regulatory Listing	FCC Part 15
Warranty	Two (2) years(limited)
Included Accessories	Two magnetic cap styles (Normal and Screw type), wwo (2) Phillip’s flat-head screws
Weight	1.25 oz. (37 g) (including battery & magnet)
Compatibility	Honeywell, 2GIG