Product Details

wireless door/window contact transmitter

WC10

The WC10 is a surface mounted Door/Window Contact that can be installed on doors, windows, and many other objects that open and close. The sensor transmits signals to the control panel or receiver when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that accepts N/C dry contact devices. The sensor is also equipped with a cover tamper for additional security.

Specification:

Wireless Signal Range	350 ft., open air, with 2GIG or Honeywell Wireless Alarm Control Panel
Code Outputs	Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery
Transmitter Frequency	345.000 MHz (crystal controlled) or other frequency
Transmitter Frequency Tolerance	± 15 kHz
Transmitter Bandwidth	24 kHz
Modulation Type	Amplitude Shift Keying—On/Off Keying (ASK-OOK)
Unique ID Codes	Over one (1) million different code combinations
Supervisory Interval	70 minutes
Peak Field Strength	Typical 16,000 uV/m at 3m
External Input Sampling Current	20 uA
External Input	Accepts N/C dry contact devices
Reed Switch Magnetic Sensitivity	10 to 15 amp turns
Reed Sensitivity	0.625 in. (1.59 cm) minimum gap, 1 in. (25 cm) typical
Magnet Type	Rare earth
Magnet Dimensions (LxWxH)	1.5 x 0.37 x 0.26 in. (3.8 x 0.94 x 0.65 cm)
Sensor Dimensions (LxWxH)	2.59 x 1.03 x 0.52 in. (6.59 x 2.63 x 1.32 cm)
Housing Material	ABS plastic
Color	White, Tan or Brown available
Operating Temperature	32° to 120°F (0° to 49°C)
Relative Humidity	5-95% Non-Condensing
Battery (included)	Two (2) CR2032, or equivalent Lithium batteries
Battery life	2 years (on normal condition)
Regulatory Listing	FCC Part 15
Warranty	Two (2) years(limited)
Included Accessories	Two (2) Phillip’s flat-head screws, one (1) two-pin connector with a 12” flying 2-wire lead, adhesive strip
Weight	1.16 oz. (33 g) (including battery & magnet)
Compatibility	Honeywell, 2GIG, GE, and DSC