Product Details

electric rotation jib cranes 3 ton

Product Description

Brief Introduction of jib cranes

The Jib Crane is a type of crane that uses a mounted arm to lift, move and lower material. The arm, mounted either perpendicular to or an acute angle upwards from a column(pillar), may rotate along its central axis through a limited arc or a full circl. A column mounted jib crane is often used in industrial settings, like warehouses, to load and unload material.

Features of jib cranes :

1. The Jib Crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling.

2. This type machine is composed by the vertical shaft, revolving arm, rotating shaft, hoist etc, the bottom of the vertical shaft is fixed on the concrete base.

3. This type machine with advantages of the simple structure, operate convenience, turning agile, wide working conditions.

Some details of jib cranes :

Application:

This machine suitable to work in the dock, warehouse, workshop etc fixed working conditions.

It can work within the 360 degrees to lift and materials handling.

Operational Method:

Pendent line with press button

Remote control or both.

Safety:

Weight overload protection device, Top quality long time bearing polyurethane materials buffer,

Crane traveling limit switch, Voltage lower protection function, Emergency stop system,

Current overload protection system and so on!

Working Environment:

1). Power source is three-phase alternating current, rated frequency is50HZ, rated voltage is 380v.
2). the altitude height of site is ought to be less than 2000m
3). Flammable explosive and corrosive gas are forbidden in the work environment
4). The crane is forbid to lift molten metal, explosives, poison and corrosives

Technical Parameter

BZN type jib crane
model	rated lifting capacity(t)	overall length(mm)	radius of gyration(mm)	overall height(mm)	lifting range(mm)
BZN0.125	0.125	3300	3000	4100	3000
BZN0.2	0.25	3400	3000	4300	3000
BZN0.5	0.5	3400	3000	4500	3000

There is always one for you !
	Pillar mounted jib crane This kind of crane is developed in recent years, it is a small and medium-size lifting equipment. This type machine jib crane with advantages of simple structure, operate convenience, turning agile, wide working conditions. Jib crane Self- standing, manual or electric control. Features: safe, reliable, high efficiency, energy-saving, time-saving and labor-saving and flexible feather, in the three- -dimensional space and can operate freely.
	Wall mounted jib crane It is a new generation of the hoist equipment developed to meet the requirement of modernized production. It's fixed on the floor and it could stand independently. And the arm fixed on the top of fixed pillar. If the arm need swing, the swing motor will be equipped on crane! And then the electrical will be installed on the cranes per actual demands.
	Wall traveling jib crane It is a new generation of the hoist equipment developed to meet the requirement of modernized production. It is wall mounted type especially applicable to short-distance, frequent and intensive hoisting operations.