Product Details

2 ton column mounted jib crane

Product Description

Brief Introduction of column mounted jib crane

The Jib Crane is a type of crane that uses a mounted arm to lift, move and lower material. The arm, mounted either perpendicular to or an acute angle upwards from a column(pillar), may rotate along its central axis through a limited arc or a full circl. A column mounted jib crane is often used in industrial settings, like warehouses, to load and unload material.

Features of column mounted jib crane :

JIB cranes are ideal for low-cost lifting and handling goods effectively within a plant.
It can be mounted to your facility floor, foundation, column, pillar or wall to accommodate any space constraints or work plans.
Our Jib Cranes offer an extensive range of installation options and capacities, with the power to create the best material handling solution with maximum space utilization.
Classification of Jib Crane
Free standing jib crane; Wall mounted jib crane; Wall travelling jib crane; Articulating jib crane,etc.
About Free Standing Jib Crane:
Free standing jib cranes have a load capacity from 0.5t to 5t.
It is useful where overhead hoists are neither practical nor feasible.
This machine utilises 300 degree floor coverage, allowing unrestricted placement of machinery and equipment.

Components of column mounted jib crane :

Some details of column mounted jib crane

Application:

This machine suitable to work in the dock, warehouse, workshop etc fixed working conditions.

It can work within the 360 degrees to lift and materials handling.

Operational Method:

Pendent line with press button

Remote control or both.

Safety:

Weight overload protection device, Top quality long time bearing polyurethane materials buffer,

Crane traveling limit switch, Voltage lower protection function, Emergency stop system,

Current overload protection system and so on!

Working Environment:

1). Power source is three-phase alternating current, rated frequency is50HZ, rated voltage is 380v.
2). the altitude height of site is ought to be less than 2000m
3). Flammable explosive and corrosive gas are forbidden in the work environment
4). The crane is forbid to lift molten metal, explosives, poison and corrosives

Technical Parameter

model	BZD1	BZD2	BZD3	BZD5	BZD10	BZD16	BZD20
rated lifting capacity(t)	1	2	3	5	10	16	20
rotation angle(degree)	360	360	360	360	360	360	360
min. radius of gyration(m)	1.5	1.5	1.5	1.7	1.8	2	2.5
max. radius of gyration(m)	7-12	7-12	7-12	7-12	7-20	7-15	7-15
overall height(m)	3-8	3-8	3-8	3-8	3-8	3-8	3-8

Note:Parameter for reference,we can design according to customer's requirements.

There is always one for you !
	Pillar mounted jib crane This kind of crane is developed in recent years, it is a small and medium-size lifting equipment. This type machine jib crane with advantages of simple structure, operate convenience, turning agile, wide working conditions. Jib crane Self- standing, manual or electric control. Features: safe, reliable, high efficiency, energy-saving, time-saving and labor-saving and flexible feather, in the three- -dimensional space and can operate freely.
	Wall mounted jib crane It is a new generation of the hoist equipment developed to meet the requirement of modernized production. It's fixed on the floor and it could stand independently. And the arm fixed on the top of fixed pillar. If the arm need swing, the swing motor will be equipped on crane! And then the electrical will be installed on the cranes per actual demands.
	Wall traveling jib crane It is a new generation of the hoist equipment developed to meet the requirement of modernized production. It is wall mounted type especially applicable to short-distance, frequent and intensive hoisting operations.

Relative Products

According to meet various requirements from customers, we also produce gantry crane , electric flat car , overhead/bridge crane ,jib crane , electric hoist ect. If you have any interests in those products , please contact me or scan our website www.kltqz.en.china.cn for more details.

Packaging & Shipping