Specifications

induction heat treatment equipment
1.IGBT technology.
2.Perfect protection function.
3.Converting frequency technique

Induction Heat Treatment Equipment

  1) Feature:

1. IGBT inversion technology reduce operating cost
2. High efficiency up to 90%
3. LC series circuit and voltage feedback design achieve energy saving up to 30% compared with SCR technology induction machine
5. Diode rectification technology make sure high power factor –never less 0.95
6. Soft switch technology and prefect protection system enhance good reliability

7. Suitable for heating medium size of part.

 2) Specifications:

Name	Induction Hardening Machine
Model	JLC-160KW
Power input	3 phase 415V 50/60HZ
Operating Voltage Range	363V~456V
Max. Input Current	245A
Max. Power Output	160kw
Oscillating Frequency	10-30KHZ
Efficiency	90%
Duty Cycle	100%
Cooling Water  (Power Unit)	0.5Mpa, 32L/min
Alarm Temperature	<40°C
Dimension	Generator:900x670x1650mm
	Transformer:800x440x580mm
Net weight	Generator : 175kg
	transformer : 105kg
Timing	1M~99.99H,1S~99.99M,0.01S~99.99S

  

3) Spare parts for JLC-160KW Machine

 

Item	Name of machine or parts	Specification	Amount
1	JLC-160KW Generator	-	1 pc
2	JLC-160KW Transformer	-	1 pc
2	Foot switch	3 core	1 pc
3	Induction Coils	-	2 sets
4	Coil connect pole	-	2 set
5	Instruction Manual	-	1
6	Packing list and receipt	-	1
7	Guarantee card	-	1
8	Products certificate	-	1

 

4) Coil design as your drawing

We will make dia: 352-354mm,height 50mm,single circle coil.

Better you make revolving device for gear. The heating time is about 1-2 seconds a piece.

 

 

5) Application:
1. Pre-heating for forging and forming
2. Brazing
3. Heat treatment such as surface hardening
4. Melting for aluminum, copper etc
5. Pipe Pre-heating and soak before after weld
6. Pipe heating for elbow machine