Specifications

JLC-300 Induction Heating Unit
1.IGBT technology.
2.Perfect protection function.
3.Converting freque

JLC-300 Induction Heating Unit

  1) Feature:

1. IGBT inversion technology reduce operating cost
2. High efficiency up to 90%
3. LC series circuit and voltage feedback design achieve energy saving up to 30% compared with SCR technology induction machine
5. Diode rectification technology make sure high power factor –never less 0.95
6. Soft switch technology and prefect protection system enhance good reliability

7. Suitable for heating medium size of part.

 2) Specifications:

 

Name	Induction Hardening Machine
Model	JLC-300KW
Power input	3 phase 415V 50/60HZ
Operating Voltage Range	363V~456V
Max. Input Current	450A
Max. Power Output	300kw
Oscillating Frequency	10-30KHZ
Efficiency	90%
Duty Cycle	100%
Cooling Water  (Power Unit)	0.6Mpa, 32L/min
Alarm Temperature	<40°C
Dimension	Generator:1200x950x1650mm
	Transformer:950x650x750mm
Net weight	Generator : 350kg
	transformer : 180kg
Timing	1M~99.99H,1S~99.99M,0.01S~99.99S

 

   

3) Spare parts for JLC-300KW Machine

 

Item	Name of machine or parts	Specification	Amount
1	JLC-300KW Generator	-	1 pc
2	JLC-300KW Transformer	-	1 pc
2	Foot switch	3 core	1 pc
3	Induction Coils	-	2 sets
4	Coil connect pole	-	2 set
5	Instruction Manual	-	1
6	Packing list and receipt	-	1
7	Guarantee card	-	1
8	Products certificate	-	1

 

 

4) Coil design as your drawing

We will make dia: 352-354mm,height 50mm,single circle coil.

Better you make revolving device for gear. The heating time is about 1-2 seconds a piece.

 

5) Application:
1. Pre-heating for forging and forming
2. Brazing
3. Heat treatment such as surface hardening
4. Melting for aluminum, copper etc
5. Pipe Pre-heating and soak before after weld
6. Pipe heating for elbow machine