WiFi Outdoor Standand IEEE 802.11 b/g/n Repeater
Negotiable
Min.Order:1
Traditional APs Conventions
The Source AP MUST be changed to WDS Repeating Mode as same as the Repeating AP.
Why WAB-2401-O (Outdoor WiFi Repeater) ?
Not necessary to change any setting of the source AP. Just put the Repeater’s SSID (and security key if requested), then it will automatic to connect to the Source AP and immediately to expand the wireless coverage.
Specification: |
|
Standard Compliance | IEEE 802.11b/g/n standard |
Antenna | N jack connector 5 dBi Omni |
Ethernet | 1 10/100Base-Tx |
Frequency Range | 2.400GHz~2.4835GHz |
Operating Cannel | 2.412~2.462GHz(Canada,FCC)/ 11 Channels |
| 2.412~2.484GHz(Japan,TELEC)/ 14 Channels |
| 2.412~2.472GHz(Euro,ETSI) / 13 Channels |
Modulation Technique | Orthogonal frequency division multiplexing (OFDM) |
| Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) |
Security | 64/128bit WEP, WPA, WPA2, 802.1x and 802.11i |
Media Access Protocol | CSMA/CA with ACK |
Output Power | 802.11b : 25 ± 1 dBm |
(Average) | 802.11g : 23 ± 1 dBm |
| 802.11n : 23 ± 1 dBm |
Data Rate | 11n : 300/270/240/180/120/90/60144.4/120/115.6/86.7/57.8/43.4/ 28.9/14.4 Mbps |
11g : 54/48/38/24/18/6 Mbps with auto-rate fall back | |
| 11b : 12/11/9/5.5/2/1 Mbps with auto-rate fall back |
Sensitivity | -74 dBm @54Mbps |
-89 dBm @11Mbps | |
-70 dBm @11n (20MHz) | |
| -66 dBm @11n (40MHz) |
Power adapter | 802.3af PoE |
Operating Temperature | -10~55°C ambient temperature |
Storage Temperature | (-20)~70°C ambient temperature |
Humidity | 5%~90% |
Approval | FCC Part 15 & CE |
Dimension | 197.5 x 197.5 x 63 mm |
Weight | 700g |