POE Solution, buy 4 Port IEEE 802.3 af/at +1 Combo (UTP+Fiber) PoE Fiber Switch, MITS Taiwan, PoE Extender, PoE Switch, MDI/MDIX auto-crossover on China Suppliers Mobile

Product Details

Product Description

PFS-01O4-M is an Industrial 802.3at/af PoE+ Fiber Switch, providing Power over Ethernet capability and non-blocking wire-speed Fast Ethernet performance in harsh industrial environment. It provides 4 port 10/100Base-T copper with 802.3af/at PoE injector and also provide one Combo Port (UTP/SFP) for uplink to data-center. The PFS-01O4-M design for Industrial like function like redundant power input, Uplink fault detection for NO output, also can using fiber-GBIC for Fiber link without Media convert design.

The PFS-01O4-M is well suited for applications in deploying surveillance system, and security control and wireless service in climatically demanding environments with wide temperature range from -10 to 60 degrees C.

High Power PoE for Securty and Public

To fulfill the demand of High Power PoE for network applications with Megabit speed transmission under wide temperature, the PFS-01O4-M provides 4 10/100Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30 watts of power output and data per port over one Cat.5E / 6 Ethernet cable.

With totally 60-watt PoE budget on the whole system, the PFS-01O4-M is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.

Key Features

l TP port Support MDI/MDIX auto-crossover function.

l TP port Support 10/100Base-T Auto-negotiation.

l Support Max packet size 1552 byte.

l Provide 4 PoE ports can transfer data via a single cable and power, also compatible IEEE802.3af/at each Port.

l Support Power fading protect like OVP and OCP.

l Uplink port provides one set of Combo Port (SFP fiber and UTP) two kinds of interfaces to meet the 100MCat5e/Cat6 cable or fiber connection capacitywithout Media convert.

l Design DIP switch setting for Uplink fault detection output.[Fault Close/ Normal Open],

l Design for redundant power input, also can upgrade totally PoE budget to 120 Watt.

Applications

LED Indicators on the Front Panel

LED	Status
LED	Glowing	Dimming	Flashing
POWER	DC power feeding in	Not powered	N/A
LAN Port1~4 State/Act	LAN Port Link	Disconnected or Link failed	Received or Transmit
LAN Port Up State/Act	Uplink Port UTP/SFP Link	Disconnected or Link failed	Received or Transmit
LAN Port Speed	Port Connect with 100Mbit	Port Connect with 10Mbit	N/A
LAN 1~4 PoE Status	Indicate the port is providing 48/56V DC in-line power.	The port is turn-off 48/56V DC in-line power.	N/A

DIP Switch Config Setting

CONFIG

DIP1

Uplink Port Selecting

DIP2

Uplink Fault DO/OUT Controller

Fiber Port for Uplink Enable

Enable DO/OUT

OFF

UTP Port for Uplink Enable

Disable DO/OUT

Attention: To actively update DIP1 switch settings, power off and then power on the PSF-0104-M

Recommend CONFIG Setting

Uplink Interface Using SFP Mini-GBIC

CONFIG	DIP1	DIP2
	ON	ON

Uplink Interface Using UTP RJ45

CONFIG	DIP1	DIP2
	OFF	ON

Ports on the Real Panel

Port Name	Type	Functions
DC IN	DC 48/56V	Connects to the power adapter
LAN1~4	RJ45	Connects to Ethernet port on FTTx/xDSL Modem or Switch for Internet Access.
SFP	SFP	Option SFP type Gigabit for Fiber Link with longer distance

Note: Uplink port for SFP or UTP port cannot using in the same time.

Specification

Product Model:	PFS-0104-M 4-port IEEE 802.3af/at+1 Combo (UTP+Fiber) POE Fiber Switch
Technical Specifications
Hardware
Connectors	4 x 10/100 Base-T RJ45 with PSE function
	(Uplink Port) Fast Ethernet: 1 x 10/100 Base-T RJ45 TP
	(Uplink Port) Fiber: 1x SFP Socket (optional SFP transceivers)
	4 PIN DC In (PWR 1)
	2 PIN DC In (PWR 2) Terminal Block
Indicators	Power LED
	LAN 1~4 Link / Act LED
	LAN 1~4 Speed LED
	LAN 1~4 Poe On/ Off LED
	WAN Link/ Act LED (For UTP/Fiber Uplink Status)
Dip Switch Functionality	Uplink Interface Setting (ON->Fiber, Off-> UTP)
Dip Switch Functionality	Uplink No Connection /No Signal Output : ON/OFF
Power Protection: (Surge)	IEC 61000-4-2 level 4 (ESD), 15KV (air discharge), 8KV(contact discharge)
	IEC-61000-4-5
	MIL STD 883G, method 3015-7 Class 3B, -25kv HBM (human body model)
Installation	DIN Rail Kit and Wall Mount Ear
Dimension	173mm(W) X90mm (D) X 28 mm (H)
Weight	450g
Power Requirement	External Power Supply: 48V~56V/ 65W
	System Power Consumption:< 4 Watts
	PoE Power Budge: 60W (Can add 2^nd Power Adapter to extend)
Power over Ethernet
PoE Standard	IEEE 802.3af/ IEEE 802.3 at Power Over Ethernet
Power Pin Assignment	4/5 (+), 7/8 (-)
PoE Power Output	Per port 48~56V, DC 350mA Max. 15.4 Watts (IEEE 802.3af)
PoE Power Output	Per port 48~56V, DC 600mA Max. 30Watts (IEEE 802.3at)
Max. number of Class 4PD	4
Switch Specification
Network Standards	IEEE 802.3 10 Base-T, 10M bit/s
	IEEE 802.3u 100 Base-TX/100 Base-FX, 100M bit/s, Auto negotiation
	IEEE 802.3x Full Duplex and Flow Control
	IEEE 802.3 af Power over Ethernet
	IEEE 802.3 at High Power over Ethernet
	MDI/MDI-XZ Auto Crossover
Switch Processing Scheme	Store and Forward
Address Table	Support 2K MAC address entries
Flow Control	Back pressure for half duplex IEEE 802.3x . Pause Frame for full duplex
Switch fabric	1Gbps
Maximum Transmit Unit	1552 byte
Emissions Compliance	FCC part 15 Class B, CE Mark
Environmental Conditions	Operating Temperature: -10°C~+65°C
	Storage Temperature: -20°C~+70°C
	Operating/ Storage Humidity: 10%~90%, Non-condensing