Product Details

Wireless H/L Voltage Clamp Current Meter

We are the supplier of Chinese State Grid!

Product Description

Wireless H/L Voltage Clamp Current Meter introduction:

HZRC9200B Wireless H/L Voltage Clamp Current Meter has broken through the traditional structure, which is specially well-designed for measuring high voltage current, adopt latest CT technology and integrated mask digital technology, composed of special clamp current meter, wireless receiver and high voltage insulation rods. Wireless transmission can receive measured data within 30 meters line. Without insulation rods, it can used as high-precision low-voltage clamp meter and leakage current meter , can accurately measure the current or leakage current of 0.01mA.

Wireless H/L Voltage Clamp Current Meter specifications

Function	H-voltage AC current measure,L-voltage AC /leakage current measure, AC current monitor online
Power Supply	DC6V Alkaline Dry Battery(1.5V AAA * 4)
Test Method	Clamp CT, Integral Method;;hook the meter on the line to test,save the physical power of user.
Transmission method	wireless transmission, the maximum distance for direct transmission is about 30m.
Clamp Diameter	φ68mm
Range of measurement	0.00mA~1000A(50Hz/60Hz Automatic
Resolution	0.01mA
Shift	0.00mA~1000A Automatic Shift
Test Accuracy (23℃±5℃,≤80%RH)	0.00mA~299mA: ±1%±3dgt
	0.30A~49.9A: ±1.5%±5dgt
	50.0A~199.9A: ±2%±5dgt
	200A~600A: ±3%±5dgt
	601A~1000A: ±4%±5dgt
Display Mode	4 digital LCD display
LCD Dimension	Tester: LCD:35mm×21.5mm receiver LCD:47mm×28.5mm
Meter Dimension	Tester:218mm×135mm×60mm receiver:170mm×75mm×30mm
Sampling Speed	About 2 times/second
Data Storage	99 Groups; during storage, the symbol “MEM” gives indication, “FULL” mark will flash to indicate the memory has been full.
PEAk Maintenance	Automatically maintain the height of the test value,usually in the test mode pressPEAK,LCD top right corner will display “PE”,that is, to keep open the PEAK function, then press PEAK key to cancel this function key
Circuit Voltage	Test insulating sheath wires(≤60kV)and bare wire t(≤35kV)(operated with insulation rod)
Data Preservation	Under general test mode, press HOLD button to preserve data, “DH” symbol display. then press HOLD Key to cancel this function
Data Access	“MR” symbol indicates, it can read the stored data by turning upwards and downwards.
Overflow Display	Exceed measurement range overflow function: “OL A” symbol display
Auto Shut Down	About 15 minutes after booting, the meter will shut down automatically, in order to decrease the battery consumption.
Battery Voltage	When the battery voltage is below 4.8V, the symbol of battery voltage“ ”will show to remind to replace battery.
Weight	Tester:About 620g (Including battery) receiver:about 220g(Including battery) Total quality of meter: about 2.5kg(including insulation rod and battery)
Work Temperature and Humidity	-10℃~40℃;≤80%Rh
Storage Temperature and Humidity	-10℃~60℃;≤70%Rh
interference	No same frequency interference of 315MHz and 433MHz
Insulated Rod Dimension	φ32mm,1m/ Section(5 Sections)
Insulation Intension	Tester :AC 2kV/rms(Between core and shell) Insulation rod:AC 100kV/rms(5 sections insulating rod all connections, between both ends)
Structure	Anti-Dripping Type II
accessories	Tester:1set;receiver:1pcs; meter box:1pcs;Insulation rod(1m):5 Sections;Battery(Alkaline Battery LR03):8pcs

After-Sales Service

Wireless H/L Voltage Clamp Current Meter from the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services. The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options.