Dye printing thickeners, buy disperse thickener EM-628 fornylon dye printing (YIMEI decades of experience) on China Suppliers Mobile

Product Details

Specifications

1) Reverse polymerization
2)No blockage, high color yield
3)manufactory wholesale

Disperse Printing Thickener(EM-28)

2. Thickener for Textile Dye printing

EM-628

1)Appearance yellowish viscous liquid

2)Solid content 36±2%

3)Dosage: 3%

4)PH value 6~7

5)Viscosity:100.000-150.000 mpas

Thickener for Dispersion Printing

1)Printing paste complemented by EM-628 has good color yield, sharp definition.Even under special situation,the paste won’t spray out.

2)Economical to use.Compared to sodium alginate,EM-628 is much cheaper,and reduce cost.

3).To enhance color depth in loop ager for disperse prints,soft hand feeling.

EM-610

1)Appearance yellowish viscous liquid

2)Solid content 36±2%

3)Dosage: 3%

4)pH value 7±0.5

Thickener for Reactive Printing

1)Strong water cohesive and thickening ability.

2)High concentration, good color yield.

3)Sharp printing definition, no influence to screen handle

4) Suitable for flat screen printing or rotary screen printing.

1)General Description

EM-628 printing thickener is a kind of acrylic polymer in viscous liquid, serving as printing carrier in dispersion printing on textiles. Usually, EM-628 can take the place of other kinds of dispersion thickener, like sodium alginate.

2) Technique Data

Appearance Solid content Viscosity PH value(25°C)

yellowish viscous emulsion 36±2% 100.000-150.000 mpas 6~7

Thickening capability

a. Mix with water 3% dosage of EM-628,rotary viscosity will be lower than 22pa.s.

b. Mix with 0.4M(About 3.36% dosage)NaHCO₃aqueous solution: 6% dosage of EM-628, rotary viscosity will be higher than 5pa.s.

3) Property and features

1. Viscous liquid, easy to take out or mix with other auxiliaries.

2. Printing paste is easy to make, it can be ready in a while after high-speed stirring.

3. Post-thickening function allows extra dosage even in case the printing paste is not viscous enough. Add some EM618 when stirring to adjust the consistency of printing paste.

4. The performance of prepared printing paste is very stable, there is no problem to use the rest of paste next time.

5. Printing paste complemented by EM-628 has good color yield, sharp definition. Even under special situation, the paste won’t spray out.

6. Economical to use. Compared to sodium alginate, EM-628 is much more cheaper,which largely reduces processing cost.

7. To enhance color depth in loop ager for disperse prints. soft hand feeling.

4) Usage

1. Measure certain dosage of EM-628 thickener, add specified dosage of water, and stir the mixture with high-speed emulsion centrifuge. Paste will be shaped in a few minutes.

2. Mix dyestuff and water together. Add EM-618 thickener, while mixture is stirred with high-speed emulsion centrifuge, until it reaches required consistency.

3.Dispersed dyestuff paste formula for reference

Dispersed dyestuff Water EM-628 Total

1-10% 85-90% X% 100%

5) Working procedure of printing

Printing→Drying→Vaporing→Postprocessing→Finished products

Notes: Above usages have been proved through practice. But considering practical printing techniques, please choose the right manufacturing process after experiment.