Specifications

Professionally produce textile screen pigment emulsifier, printing thickener, pigment paste, printing binder, water-based ink

Pigment Emulsifier 

(More than 15 years of experience)

1) General Description 
EM-50 Emulsifier is used to make water-in-oil type of paste.It is nonionic emulsifier and play high impact on printing coloration and viscosity.

2) Technique Data  

Appearance          Composition                        Solid content          PH value

yellowish        fatty alcohol-polyoxyethylene ether    40±2%               6.7-7

viscous liquid

3)Property and Features

1. Strong electrolyte. Has little impact on the viscosity of paste when adding ammonia sulfate, urea, sodium carbonate or reserve salt.

2. During making paste, the proportion of ink and water can be at any rate in the range 20%-80%. Add some thickener to get higher viscosity when dosage of kerosene is less.

3. The mixture of prepared paste, sodium alginate and modified starch can be applied to reactive dyes printing. That can improve color yield and reduce dosage of dyestuffs.

4. Applied to coating pigment printing. It can enhance printing result in color brightening and hand feelings. To white textile printing, use pigment 8501 and 8401, and it can avoid color paste to get gelled.

4)Usage

   Measure certain amount of water and emulsifier and put them into container. Stir mixture with high-speed disperse mill. Slowly add kerosene during stirring. Do it for about 10 minutes.

5)Safety Notice

1. Because of its consistency, please add water firstly and then emulsifier, in case emulsifier is stick to the bottom of barrel and can’t be fully used.

2. When emulsifier sticks to hands or tools, clean it with dry cloth or paper.

3. Please close the barrel after use, in case emulsifier is polluted by bacteria and lose capacity.

Model	Technical Data	Property and Features
EM-50	1)Appearance: White or yellowish viscous liquid     2)Composition: fatty alcohol-polyoxyethylene ether     3)Solid content: 30±2% 4)pH value:  6.7-7	1) Used to make water-in-oil type of paste. 2) Nonionic emulsifier and play high impact on printing coloration and viscosity.
EM-GL	1)Appearance: White or yellowish viscous liquid     2)Composition: fatty alcohol-polyoxyethylene ether     3)Solid content: 40±2% 4)pH value:  6.7-7	1) Strong electrolyte 2) Widely applied to reactive dyes printing and coating pigment printing 3) Improve color yield and reduce dosage of dyestuffs 4) Enhance printing result in color brightening and hand feelings 5)Avoid color paste to get gelled.
EM-DP	1)Appearance: White or yellowish viscous liquid     2)Composition: fatty alcohol-polyoxyethylene ether     3)Solid content: 36±2% 4)pH value:  6.7-7	Discharge print Emulsifier 1)Applied to textile discharge printing 2)Used to make water-in-oil type of paste. 3)Nonionic emulsifier and play high impact on printing coloration and viscosity.

 

 

 

Notes: Above usages have been proved through practice. But considering practical printing techniques, please choose the right manufacturing process after experiment.