Detail Introduction

SANYYO Sand Washing Machine is manufactured in the following model numbers LS, 2LS, and XSD.
The LS Sand Washing Model is an efficient machine as it is coupled with new technology which enables advanced cleaning of both sand and slag materials. Sand washing machinery is used widely for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservation, hydropower, cement mixture stations and so on. 

Features

It is a simple structure consisting of an impeller being driven horizontally by a motor. The bearings are separated from water and material to illuminate damage by contact with wet product.
This machine is used in quarries to clean sand and has many advantages when compared to the traditional spiral sand washer machine since there is little loss of medium sized sand or stone powder.
This sand washer is able to produce internationally accepted sand and fine product used in the construction industry. It can also be used to wash cobble and broken stones for construction. There are no other wearing parts except for the impeller blade and bearings. It has long service life and is easy to maintain.

Friendly exchanges with guiers over the world

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.And we are located in Pudong area,Shanghai China.Nearby the Pudong International air port!

Q: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 25-30 days if the goods are not in stock, it is according to quantity.

Q:Payment
A:30% by T/T in advance once sign the order + 70% before shipment

Q: What about Warranty? what will we do if the machine is broken down
A: The warranty period for all of huahong’s structural and mechanical equipment is normally two years longer than the other suppliers. Wear parts are not covered in warranty unless the component part is found to be flawed.In the warranty periods,our sales engineers will be to the machine working spot to repair the machines with free of charges.

Q: What should we need to do for if we want to get a best quotation
A: Hi guiers over the world, if you want to get the correct and exact selection of the model earlier ,please help us with following information
1.the capacity (tons per hour )
2.input and output size
3.stone material to be crushed

Our packing and payment terms

1.We usually accept T/T,L/C,D/P,D/A.
2.T/T: 30% in advance as the deposit payment,the balance will be paied before shipemt;
3.We will take pictures of finished products before delivery.
Ways of Packing
exporting standard packing,for example:wood packing,bulking packing,iron packing,nuded packing,etc.

Transportation:
1.By sea Freight or by air.
2.MSK/MSC/APL/EMC/WANHAI/KLINE/CMA/NDS,etc.Also we could meet the customer's requestments if they have nominated shiping company.
3.In order to meet customer's requestments for tariff preference,we will provide the full set clearance docs,also provide you the CO/CNCA/Form E,etc.

Thank you for your kindly patient reading!
Any needs and technical problems, contact us freely. We are more than glad to help. Our engineer will design the best solution drawing for you as your requirements !

Welcome to Clirik !
Our factory is just need 20 minutes far away from the NO.8 Metro, We can pick you up from there.

You may interested in other products,click below pictures will take you big eyes.