Specifications

screw Sand Washing Machine
Sand Washer
1Reasonable structure
2Large capacity, low consumption
3Little loss during

Working principle of Spiral Sand Washing Machine

When the machine works, through the V belt and the speed reducer, the electrical machinery makes the gear eduction and then drives the impeller rotate slowly. The sand and crushed stone enters the tank washer through the feedertrough, driven by the impeller they roll and grind mutually. Through co-grinding, the impurity covers on the surface of the sand and crushed stone as well as foreign matters with small proportion are removed. At the same time, the water vapor level surrounding sand and crushed stone is distructed thus favors the dehydration. Meanwhile, adds water to create a strong water flow, promptly carries off the impurity and the small proportion foreign matters, and discharge from the overflow port tank washer, completes the cleaning action. The clean sand and crushed stone is carried off by the leaf blade, and is finally poured into the discharge chute from the revolving impeller, completes the cleaning action.

Characteristics of Spiral Sand Washing Machine:-High level cleaning; reasonable structure-Big treatment amounts; small power dissipation
-Small loss of sand during the process of sand washing.-Much lower malfunction rate than sand washing machine used commonly at present. 

main technical parameter

 

Model	Helix diameter(mm)	Length of tub(mm)	Speed of helix(r/h)	capacity(t/h)	Selected size(mm)	Water consumption(t/h)	Motor power (kw)	Weight  (t)	Overall dimensions (mm)
LS×915	915	7585	21	100	≤10	10—80	11	3.48	8500×2950×1930
2LS×915	915	7585	21	200	≤10	20—160	2×11	165.2	8420×3765×1930
LS×1115	1115	9782	17	175	≤10	20--150	15	10.18	10970×3945×4720
2LS×1115	1115	9782	17	350	≤10	40—300	2×15	17.94	10970×5250×4720
XSD2610	2600	3220	0.8	50	≤10	4—4.5	5.5	2.7	3220×2125×2670
XSD3016	3000	3810	0.8	80	≤10	10--20	15	3.3	3800×2686×3085