Product Description
ES-P28B Wall-mounted motion detector sensor switch/Infrared detector switch
ES-P28B is a new energy-saving lighting switch, it adopts high sensitivity detector, MCU control, controllable Silicon and SMT; It gathers automatic, convenient, safety and practical functions; The wide detection range is made up of the up and down, left and right service field; It utilizes the infrared energy from Human Body as the control-signal source, When one enters the detection field, it will start the controlled load; It can identify day and night automatically; Its installation is convenient and its range is wide; It has the functions of the power indication and the detection indication.
Specifications
Packaging & Shipping
PACKAGING DETIAL | one gift box per piece, 100pcs one carton(adjustable) | By sea/air(avaible) |
N.W/G.W(KGS) | 10.8/12.4 |
PACKING SIZE(CM) | 51.5*47*27.5cm |
FUNCTION:
- Ø Can identify day and night: the consumer can adjust working state in different ambient light. It can work in the daytime and at night when it is adjusted on the “Lux” Max position. It can work in the ambient light less than 3 lux when it is adjusted on the Min position. As for the adjustment pattern. Please refer to the resting pattern.
- Ø Time-delay is added continually: When it receives the second induction signals after the first induction, it will restart to time from the moment.
- Ø Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
- Ø The switch: The switch is “ON”,“OFF”,“AUTO”.
INSTALLATION: (see the diagram)
- Ø Screw off two nails on the faceplate and unload the faceplate
- Ø Unload the small cover directly and adjust the time and lux knob
- Ø Loose the screws in the connection terminal, and then connect the power to connection terminal of sensor according to connection-wire diagram
- Ø Install the sensor in rectangle hole, fix the screw through the mounting hole
- Ø Install back the small cover and faceplate, switch on the power and then test it.
CONNECTION-WIRE DIAGRAM:
(see the right figure)
Company Information
Energylux founded in 1989, starting from rubber business. Than move to smart electronical business, our product list as following:
- PIR motion sensor series
- Microwave sensor series
- PIR sensor lamp series
- Microwave sensor lamp series
- PhotocellSensor bulb and sensor holder
- Smoke alarm
Contact us
Mia
Skype ID: Mia.gu1991
Whatsapp:86-13566398849
Facebook: //?ref=bookmarks