Product Details

Product Description

ES-P23A PIR ACTIVATED SWITCH standard wall infrared sensor switch

ES-P23A is a new energy-saving switch, it adopts integrated circuit and the good sensitivity detector. It incorporates automatism, convenience, energy-saving, safety and practicality. It works by receiving human motion infrared rays. It can start the controlled load at once when one enters detection field. It can identify day and night automatically. Its installation is very convenient and using range is wide. It has the functions of power indication and detection indication.

specifications:

MODEL	ES-P23A
DETECTION RANGE	9M
DETECTION ANGLE	160°
POWER FREQUENCY	50/60HZ
RATED LOAD	1200W(220-240V/AC)
TIME SETTING	10sec-7±2min
WORKING HUMIDITY	<93%RH
WORK TEMPERATURE	-10°C~+40°C
INSTALLING HEIGHT	2m-4.5m
NET WEIGHT PER CARTON(KGS)	10.8
GROSS WEIGHT PER CARTON (KGS)	12.4
QUANTITY PER CARTON(PCS)	100
PACKING SIZE(CM³)	45.53635.2

FUNCTION:

Ø LUX adjustment: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 10LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
Ø Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(set time).
Ø Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
Ø The switch: “ON”,“OFF”,“PIR”.

INSTALLATION:

Ø Shut off the power.
Ø Loosen the connection column on the bottom of sensor, plug the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.
Ø If you want to install it in quadrate connection box, penetrate the setscrew into installation hole, block on radiator to aim at the installation hole on connection box, then tighten the screw; if you want to install it in circular one, you can use the same way as the quadrate, also adjust the sensor’s position, tighten the setscrew on surface, then the fixing arm will open automatically, fasten the connection box.
Ø Switch on the power then test it.

Packaging & Shipping

PACKAGING DETIAL	one gift box per piece, 50pcs one carton(adjustable)	By sea/air(avaible)
N.W/G.W(KGS)	10.8/12.4
PACKING SIZE(CM)	45.53635.2