Product Details

Specifications

led tube driver
1.input voltage:AC85~265V
2.Output voltage:30~100V
3.Current:40~250MA
4.power:4~25W

non-isolated led tube driver specfication

Manufacturer Information	Part Number	LT-4~25W
	Product name	30-100V 4~25W T8 built-in Non-isolated led tube driver
	Sphere of application	T8 built-in
Input	Input voltage range(Vac)	100-240V
	Input voltage frequency(Hz)	47~61
	Load input current(mA)	150Ma max@AC 220V
	Start surge current(A)	1A max
	Startup delay time(S)	≤1
	Power factor	≥0.96
Out put	Output normal power(W)	4~25W
	Output voltage range(Vdc)	30~100V
	Normal output current(mA)	40~250MA± 15mA
	Short circuit protection	Yes
	Light protection	Yes
	Line regulation(%)	±5
	Loading effect(%)	±10
	Start output current overshoot(%Io)	5
	Ripple & Noise (mV)	5
	Start setting time(ms)	30
Protection	Input under-voltage protection(Vac)	95 Max
	Output open circuit voltage (Vdc)	≤60
	Protection level	Bare
	Output short circuit protection	Hiccup mode, restore automatically
Environment	Working environment (°C)	-20~55
	Storage temperature (°C)	-40~85
	Relative humidity	90%RH max.
	Temperature coefficient (%/°C)	±0.08 max.
Others	MTBF	18000h MIL-HDBK-217F,Tc=25°C
	Efficiency	≥85% (typ,220Vac, According to the active power calculation
	weight (g)	32+/-5%
	Appearance size(mm)	17815.510.5mm

non-isolated Led tube driver Electric specfication

1:Constant current output

2:Output current accuracy:5%

3:Power efficiency:>90%

4:Power factor (PF):>0.95

5:Ambient temperature:-40°C—60°C

Non-solated Led tube driver Detailed description:

1. Adopts integrated device design, low temperature rise, low calorific value.

2. High stability, drive stable work, output current constant, no drift.

3. High security, suitable for high humidity, high dust, strong vibration environment of use;Chip inside integrated over-voltage, over-current, overheat protective circuit.

4. Has the maximum output power limiting function, to avoid the impact of the LED

5. Long use life design, normal life in 50,000 hours.

6. Through the corresponding temperature testing, aging test, efficacy test and short circuit testing.

7.May be based on customer demand of custom-made related size and function driver module.

Non-solated Led tube driver Installation and Working environment:

1. Make sure work in proper environments are stated in this Guide.
2. Do not overload.
3. Avoid free of load while a power supply is powered on, keep proper loading
4. Always keep good ventilation
5. Do not mount on wood or flammable surface, keep minimum 5CM for LED power supplies each other.
6. Keep away from inflammable or explosive environments.

Non-isolated led tube driver Application
1.LED Indoor Lighting,Reading Lamp,LED Ceiling Lamp,LED Curtain Light,
2.LED Downlight,Led tube,LED Entertainment Lighting,LED Exhibition Lighting,
3.LED Floor Lamp,LED Hospital Lighting,LED Kitchen Lighting,
4.LED Office Lighting,LED Oriental Lamp,LED Security Lighting,
5.LED Sensor Light,LED Stage Light,LED Wall Lamp,etc

Our equipment show