Product Details

Specifications

led tube driver
1.Input voltage:AC85~265V
2.Output voltage:40V
3.Current:570MA
4.Power:22W

led tube driver specfication

40V 570MA isolated led driver test reports
Output	no-load Max voltage	120V±5%
	constant current range of application	30V~40V
	constant current	570MA
	string quantity	12 string
	Max power	30W
	ripple wave and noise Max	500mvp-p
	constant current erro	±3%
	load adjustment rate	±3%
	start,rise time	<3S 230VAC full load
	maintain time	10ms 230VAC full load

Input	voltage scope	100V~277V
	Frequency scope	47~63HZ
	power factor	PF≥0.97 230VAC( full load rated output voltage)
	efficiency(230V AC)	≥0.95
	alternating current	0.123A/230AC
	surge voltage	30A/230V
	THD	< 10%
	leak current	<0.15MA/265AC

protection	Over-protection current	protection type:stop work,rocover after unusual remove
	short circuit protection	protection type:stop work,rocover after unusual remove
	thermal protection	protection type:stop work,rocover after unusual remove
environment	working environment	20%~90%
	working temperature	—30~80°C
	storange temperature ,humidity	40~80°C,10~95%RH
	temperature factor	±0.03%/°C

others	size	26016.510MM
others	adaptor	EFD(more big better for heat dissipation

Led tube driver Detailed description:

1. Adopts integrated device design, low temperature rise, low calorific value.

2. High stability, drive stable work, output current constant, no drift.

3. High security, suitable for high humidity, high dust, strong vibration environment of use;Chip inside integrated over-voltage, over-current, overheat protective circuit.

4. Has the maximum output power limiting function, to avoid the impact of the LED

5. Long use life design, normal life in 50,000 hours.

6. Through the corresponding temperature testing, aging test, efficacy test and short circuit testing.

7.May be based on customer demand of custom-made related size and function driver module.

Led tube driver Installation and Working environment:

1. Make sure work in proper environments are stated in this Guide.
2. Do not overload.
3. Avoid free of load while a power supply is powered on, keep proper loading
4. Always keep good ventilation
5. Do not mount on wood or flammable surface, keep minimum 5CM for LED power supplies each other.
6. Keep away from inflammable or explosive environments.

Led tube driver Application:
1.LED Indoor Lighting,Reading Lamp,LED Ceiling Lamp,LED Curtain Light,
2.LED Downlight,LED Entertainment Lighting,LED Exhibition Lighting,
3.LED Floor Lamp,LED Hospital Lighting,LED Kitchen Lighting,
4.LED Office Lighting,LED Oriental Lamp,LED Security Lighting,
5.LED Sensor Light,LED Stage Light,LED Wall Lamp,etc