injection mold temperature controller YK-285/ aiset temperature controller /mould temperature controller     

Specifications:

1. Working voltage: AC220V ±10% 50HZ/60HZ
2. Output load: 30A/250V/AC (Can be applied directly to a load, over to connect AC connector)
3. Power consumption:≤3W
4. Working environment: -10℃~50℃,RH≤90%
5. Display/control range: -45℃~45℃
6. Control range : -45℃~80℃
7. Resolution: 1℃, accurancy: ±1℃
8. Input signal: two channel temperature measuring sensor(fresh/refrigeration control), 10K×2Meter
9. Machine size:176(W) ×41(H) ×43(D)mm
10. Hole size:138(W) ×32.5(D)mm
11. Light: 10A/250VAC

Features:

1.Integrative control;

pressor delay protection;

3.power switch;

mory set;

5.dual window/temperature display;

6.light control

Functions:

*dual window display and control temperature, lighting control, power switch, set memory* restore factory

*settings, set memory, self-diagnosis.

*Input signal: two channel temperature measuring sensor(fresh,frozen,control), 10K X 2 meters.

*Refrigeration compressor relay: normally open 30A/250VAC

(can be used for 1P compressor, beyond the converter)

*Refrigeration compressor relay: normally open 30A/250VAC

(can be used for 1P compressor, beyond the converter)

*Lighting1: normally open 10A/250VAC

*Lihgting 2: normally open 10A/250VAC