JKTL stainless steel 2PC flange ball valve handles
No | Name of Part | Stainless steel | Carbon steel |
1 | Body end cap | ASTM A315-CF8M | ASTM A216-WCB |
2 | Nut | AISI/ASME 304/GR.8 | CARBON STEEL/GR.2H |
3 | Body joint bolt | AISI/ASME 304/GR.B8 | CARBON STEEL/GR.B7 |
4 | Body gasket | PTFE | PTFE |
5 | Ball | ASTM A351-CF8M/316 | ASTM A351-CF8M/316 |
6 | Seat | PTFE | PTFE |
7 | Body | ASTM A315-CF8M | ASTM A216-WCB |
8 | Stem | ASTM A276-316 | ASTM A216-WCB |
9 | Stem thrustwasher | PTFE | PTFE |
10 | Stem packing | PTFE | PTFE |
11 | Gland flange | ASTM A351-CF8 | ASTM A351-CF8 |
12 | Handle stop | AISI/ASME 304 | AISI/ASME 304 |
13 | Snaping | AISI/ASME 420 | AISI/ASME 420 |
14 | Handle | CARBON STEEL | CARBON STEEL |
15 | Gland bolt | AISI/ASME 304 | AISI/ASME 304 |
16 | Washer | AISI/ASME 304 | AISI/ASME 304 |
17 | Cap screw | AISI/ASME 304 | AISI/ASME 304 |
18 | Anti-static device | 316SS | 316SS |
- Split body design with flanged ends for fast installation, in line maintenance and rebuilding.
- Solid ball construction provide structural integrity and minimizes flow turbulence.
- Mounting pad complies with ISO 5211 for ease and interchargeability of actuation.
- Bottom-loaded blow-out proof stem.
- Investment cast body & end cap on sizes 1/2" to 4" sand cast body & end cap on sizes 5" to 10".
- Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
- Basic design complies with ASME/ANSI B16.34
- Flanged ends comply with ASME/ANSI B16.5
- Face-to-face dimensions comply with ASME/ANSI B16.10
- Tested according to ANSI/ASME B16.34 & API598.
- Fire Tested to API 607/BS 6577.