Product Details

Flange connection stainless steel y strainer

Product Description

Parts List and Standard Materials
Body	Cover	Screen1	Plug2	Gasket1	Bolt/Stud2	Nut2
A126-B	A126-B	304SS	A126-B	Graphite	A307-B	A563

Notes: 1. Recommended spares.

2. Materials of equivalent strength may be substituted at manufacturer’s option.

Upper Pressure Limits(Non-Shock)
Size	Body Material	M.A.W.P. PSIG(Bars)	Ends
up to 12" size	A126-B - Cast iron	200(13.79)	FF
14" and up	A126-B - Cast iron	150(10.34)	FF
Body Material		Lower Limit °F(°C)
A126-B, A395		-20(-28.9)

Features:

1. Iron strainers are complete with Flat Face flange in accordance with ASME B16.1.

2. Strainer body meets applicable ASME Standard.

3. One piece cast body.

4. Strainer is equipped with bolted cover flange that utilize a flat gasket seal.

5. Low pressure drop.

6. Upper and lower machined seats.

7. 304 SS perforated screens are standard.

8. Drain/blow-off connection furnished with plug as standard.

9. Generous screen area and properly proportioned straining chamber to minimize initial pressure drop

while maximizing time between cleanings.

10. Compact end to end dimension.

Dimensional Data - Iron Class 125
Size	A	B	C	D	E	Weight
2"	2	8.88	6	8.5	1/2	22
50	51	226	152	216	15	10
2-1/2"	2.5	10.75	8	11.25	1	35
65	64	273	203	286	25	16
3"	3	11.5	8.75	12.25	1	43
80	76	292	222	311	25	20
4"	4	13.88	9.5	13.38	11/4	75
100	102	353	241	340	32	34
5"	5	16.38	11.5	16.13	11/4	115
125	127	416	292	410	32	52
6"	6	18.5	12.63	17.69	11/2	154
150	152	470	321	449	40	70
8"	8	21.38	16.38	23	11/2	243
200	203	543	416	584	40	110
10"	10	26	19	26.7	2	390
250	254	660	483	678	50	177
12"	12	30	22	31	2	650
300	305	762	559	787	50	295
14"	14	37.38	29	41	2	815
350	356	949	737	1041	50	370
16"	16	42.5	33	46	2	1224
400	406	1080	838	1168	50	555

Purpose:

If the basket strainer is being used for protection rather than filtration, the strainer will suffice in most applications.

Service:

With services that require extremely sturdy screens, such as high pressure/temperature applications and services with high viscosity, we recommends that perforated screens without mesh liners be used. If mesh

is required to obtain a certain level of filtration, then we recommends a trapped perf./mesh /perf. Combination.

Filtration Level:

When choosing a perf. Or a mesh/perf. Combination attention should be given to ensure overstraining doer

not occur. As a general rule the specified level of filtration should be no smaller than half the size of the

particle to be removed. If too fine a filtration is specified the pressure drop through the strainer will increase

very rapidly, possibly causing damage to the basket.