Plastic circular loom, buy SBY-1800*6E plastic circular loom on China Suppliers Mobile

Product Details

Six-shuttle circular loom technical parameters and performances

Type	SBY-1800×6E
Revolutions	10-75rpm(variable frequency)
Power of main motor	7.5kw
Main speed reducer	Taper gear wheel speed reducer connected directly with the electrical motor
Shuttles	6
Track width	110mm(the face of track is plated with hard chromium)
Fold diameter	1300-1700mm
Number of warp	Max 2160pcs
Density of weft	32-64pcs/100mm(changing weft density through changing gears)
Theoretical output	43-86m/h
Warp diameter	Max Φ 120mm
Weft diameter	Max Φ 90mm
Involution electrical motor	100kg.cm
Involution width	Max 1800mm
Involution diameter	Max Φ 1100mm
Involution style	Double-cutting and double-rolling
Length statistics style	Mechanical three-shift length meter
Specs of shuttles	Φ38×230 or Φ38×270
Yarn plate specs	Φ38
Let-off device	Initiative let-off(torque electrical motor 8kg.cm×2)
Let-off rubber covered roller	Φ150mm×2515mm
Warp-broken control	It stops automatically when warp breaks
Weft-end control	Electrical motor style weft-end system
Lubricating style	The cam is lubricated circularly by force through gear pump(oil is deposited and filtered by oil box); The draw runner of shuttles is lubricated through needle valve oil dripping
Oil route protection	It stops when oil route has jam
Dimension	(L)15.6m×(W)3.5m×(H)4.4m
Weight	About 6t

Device characters:

1. Small-cam designed, the inertia of start-up is small and the speed is high.

2. Gear wheel reducer is connected straightly with the main electrical motor, high efficiency and long life. This solves the low efficiency problem of turbine speed reducer with moving strap and put an end to the hidden trouble that the swaying needle wheel reducer can’t resist shocking and can’t start with high frequency. This can reduce the energy consumption of the whole equipment and decrease the maintenance cost.

3. The dynamotor type weft detector is sensitive and reliable and cannot be influenced by dusts. It can stop automatically when weft ends. The yield of product is high.

4. The cam is lubricated circularly by force, this can promote the efficiency of the machine. It has oil route jam alarming device, avoiding abnormal wearing and tearing of the parts.

5. Turbine speed reducer for cloth rolling adopts flexible connections. This can prolong the life of the speed reducer.

6. It is more economical and efficient than SBY-2200×6E when the fold diameter is less than 1700mm.

7. The structure of device is reasonable, simple and reliable. It is reliable to operate. The quick-wear parts are few. The maintenance is convenient. The revolving cost is low.

8. The track with swallow-tailed cam prevent shuttles out.

9. The electrical system is controlled by PLC.