We want to ensure you get a repeater solution that works for you.
· High powered to ensure your property gets great coverage.
· High Quality, so it works as it should work, and won’t break down on you.
· Our repeaters boost the signal of all the operators, not just one.
All of our mobile phone repeaters are designed, manufactured and tested at our state-of-the-art facility in China, where our technical support staff are available to answer your questions anytime.
All our repeaters work for all the network operators. One solution for all.
♦ High linearity PA; High system gain;
♦ Intelligent ALC technology;
♦ Full duplex and high isolation from uplink to downlink;
♦ Automatic Operation convenient operation;
♦ Integrated technique with reliable performance;
♦ Local and remote monitoring (optional) with automatic fault alarm &remote control;
♦ Weatherproof design for all weather installation;Typical Application:
Kingtone Outdoor GSM 900MHz Repeater widely used in the areas with small traffic volume and vast coverage.They are used in the places below:
Railways Tunnels Scenery Spots Compuses Hospitals
Oil Fields Roads Touns Rual areas Airports Venues
Factories Farms Mountainous areas
Technical Specification:
high quality 3g repeater mobile gsm WCDMA2100MHz mobile signal booster
Items | Testing Condition | Specification | ||
Uplink | Downlink | |||
Working Frequency(MHz) | Nominal Frequency | 1850 – 1910MHz | 1930 - 1990MHz | |
Gain(dB) | Nominal Output Power-5dB | 95±3 | ||
Output Power (dBm) | GSM modulating signal | 33 | 40 | |
ALC (dBm) | Input Signal add 20dB | Po≤±1 | ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 | ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 | ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | ||
Time Delay (us) | Working in-band | ≤5 | ||
Peak Phase Error(°) | Working in-band | ≤20 | ||
RMS Phase Error (°) | Working in-band | ≤5 | ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB | ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 | ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | |
VSWR | BS/MS Port | 1.5 | ||
I/O Port | N-Female | |||
Impedance | 50ohm | |||
Operating Temperature | -25°C ~+55°C | |||
Relative Humidity | Max. 95% | |||
MTBF | Min. 100000 hours | |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) | |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power | |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery | |||
Application Scenarios
