3g mobile signal repeater 10w 2100 mhz 40dBm With high gain 90-95db
USD $1 - $1,999 /Set
Min.Order:1 Set
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd.
WCDMA 3G mobile cellular repeater,2W/5W/10W/20W/40W
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
High linearity PA; High system gain;
Intelligent ALC technology;
Full duplex and high isolation from uplink to downlink;
Automatic Operation convenient operation;
Integrated technique with reliable performance;
Local and remote monitoring (optional) with automatic fault alarm &remote control;
Weatherproof design for all weather installation;
WCDMA 3G mobile cellular repeater Application:
To expand signal coverage of signal blind areas where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
WCDMA 3G mobile cellular repeater Technical Specification:
Items | WCDMA UMTS 3G RF Band Selective Repeater
| ||
Frequency Range | Uplink | 1920-1980MHz | |
Downlink | 2110-2170MHz | ||
Output Power | Uplink | +33dBm | |
Downlink | +40dBm | ||
Working Bandwidth | Various bandwidth is available upon request | ||
Gain | Min. 90dB | ||
Gain Control Range | 31dB (1dB Step) | ||
VSWR | < 1.5 | ||
Ripple in Band | Max +/- 1.5dB | ||
Spurious Emissions | 9KHz-1GHz | Max -36dBm | |
1GHz-12.75GHz | Max -30dBm | ||
ACPR | ≤-45dBc | ||
≤-55dBc | |||
RF Connector | N-type Female | ||
I/O Impedance | 50 ohm | ||
Noise Figure | Max 5dB | ||
Group Time Delay | Max 5µS | ||
Temperature Range | -25 degree Celsius to +55 degree Celsius | ||
Relative Humidity | Max 95% | ||
MTBF | Min. 100000 hrs | ||
Power Supply | DC -48V / AC220V (+/-15%), 50Hz | ||
UPS Backup Power Supply (Optional) | 6 hours / 8 hours | ||
Power Consumption | Max 250W | ||
NMS Monitor Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power, Gain, Uplink ATT, Downlink ATT and etc. | ||
Remote Control Module (Optional) | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
Schematic Diagram For Outdoor Coverage :
Schematic Diagram For In-Building Coverage
Welcome to OEM From China ,
For more information more information,Pls refer our website :
Photos of our Our Company :
Certificate of Our Company :
Frequency list of Kingtone Repeaters:
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Welcome to our website : for more updated information .