GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
USD $1 - $1,999 /Set
Min.Order:1 Set
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd.
GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
GSM900 & WCDMA2100 Dual Band signal Repeater
Description:
RF Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).
GSM/WCDMA Signal Repeater are very effective equipment that can offset the covering shortage of the base station of the mobile network, expand the cover range of the base station and fill the signal blind zone to ensure the convenient and pleasant communication.
Features:
l High linearity PA; High system gain;
l Intelligent ALC technology;
l Full duplex and high isolation from uplink to downlink;
l Automatic Operation convenient operation;
l Integrated technique with reliable performance;
l Local and remote monitoring (optional) with automatic fault alarm &remote control;
Weatherproof design for all-weather installation;
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
The coverage of sites including Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Technical Specification:
Frequency range:890~915MHz/935~960MHz(GSM)
1920~1980MHz/2110~2170MHz(WCDMA)
Gain:95±3dB
Output Power:UL:5W/DL:20W
Noise Figure:≤5dB
Pass band ripple:≤3dB (GSM); ≤4dB (WCDMA)
Spurious emission:9KHz~1GHz ≤-36dBm
Items | Testing Condition | Technical Specification | |||
Uplink | Downlink | ||||
Working Width(MHz) | Nominal Frequency | GSM:890~915MHz WCDMA:1920~1980MHz; (Customized) | GSM:935~960MHz;WCDMA:2110~2170MHz; (Customized) | ||
Gain(dB) | Nominal Output Power -5dB | ≥95(Customized) | |||
Output Power (dBm) | GSM/WCDMA modulating signal | 37 | 43 | ||
ALC (dBm) | Input Signal add 20dB | Po≤±1 | |||
Noise Figure (dB) | Working in-band(Max.Gain) | ≤5 | |||
Ripple in Band (dB) | Nominal Output Power -5dB | ≤3 | |||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | |||
Transmissions Delay (us) | Working In-band | ≤5 | |||
Peak Phase Error(°) | Working In-band | ≤20 | |||
RMS Phase Error (°) | Working In-band | ≤5 | |||
Gain Adjustable Range(dB) | Nominal Output Power -5dB | ≥30 | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ±1.5 | ||
Intermodulation Attenuation(dBc) GSM | Working In-band | ≤-45 | ≤-45 | ||
ACPR(WCDMA) | Working In-band | 5M | ≤-45 | ≤-45 | |
10M | ≤-50 | ≤-50 | |||
Spurious Emission (dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 | |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | ||
VSWR | BS Port | 1.5 | |||
MS Port | 1.5 |
GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
GSM & WCDMA 900 2100 Dual Band 2g 3g gsm signal Repeater
Frequency range list for our repeaters :
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Our repeater support above frequency range .
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
Question: I work in an office building where my cell phone coverage in certain areas, including my office, is non-existent or spotty at best. How can I improve my coverage?
Answer: The requirement for reliable, always-on cell phone coverage within the office environment is increasing dramatically. It is not unusual to encounter trouble spots within a building where cell phone signals are weak or non-existent.
Kingtone repeater provides affordable and clear coverage to those trouble spots. The unit can be easily deployed and provides a coverage range of up to 100,000 square feet. Multiple units can be easily deployed to cover office areas and working locations.
Kingtone repeater can be deployed even without access to the roof or outside.
A: In general, it is 100pcs. According situation, it is negotiable.you can also place sample order.
2. Q: do you accept Customized?
A: yes,we did produce as customer requirement ,OEM & ODM are welcomed.MOQ of customized order should be 1000pcs
3. Q: Could you offer free sample to test?
A: Yes, sure. For regular VIP agency we offer free sample when New Products Launch,for New customer you pay the sample fee first when your Order reach required amount we minus the sample Cost for you.
4. Q: What payment terms you can accept ?
A: We support TT /Western Union /Paypal
Welcome to our website : for more updated information .
welcome you to visit our company website: , for more information .
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd Add:3th Floor,Bld B,Yucheng Base, Keji Road,Fengze district ,Quanzhou ,Fujian,China. |
Email: cary @ Tell: 86 595 28857991 Whatsapp:+86 13506927982 skype: cary.cao4 Web: ; |