Product Details

Product name

Remote control led swimming pool lamp

RF Control led swimming pool lamp

IP68 LED swimming pool lamp

PAR56 LED Swimming pool lamp

PAR56 LED Swimmin pool Lamp Specification

Model	OL-PAR56-315B
Input Voltage	AC12V
LED QTY	315pcs LED
Power	22W
Luminous flux	400lm
Dimension(mm)	177*100
Material	Glass
Color	RGB/White/Green/Blue
Packing	one piece individual box
Package	10pcs per exported carton
IP Rating	IP68

Item No	LED QTY	Power	Dimension (mm)	Material	G.W.	Lumen (lm)	(LUX)	Color	Volt.	Control mode
OL-PAR56-252	252pcs	18W	*178114**	Glass	0.75	300	600	RGB	AC12V	Built-in controller
										Remote controller
						1200	1900	W/G/B/R/Y		N/A
OL-PAR56-350	350pcs	25W				450	1000	RGB		Built-in controller
										Remote controller
						1700	2500	W/G/B/R/Y		N/A
OL-PAR56-558	558pcs	40W				700	1800	RGB		Built-in controller
										Remote controller
						2500	3300	W/G/B/R/Y		N/A
*Inner packing:215215145mm;Carton Size:734240445mm (10pcs/carton)*

PAR56 LED swimming pool Lamp Features

1)Viewing angle:15 to 30°

2)IP range:IP68

3)Housing:glass

4)Install type:wall-mounted

5)Controller:RF remote controller

6)Dimensions:177 x 100

7)Program can be made as per request

8)OEM/ODM orders are welcome

PAR56 LED swimming pool Lamp Application

LED lamps are widely used for the decoration lighting under water or any water view such as the swimming pool,eruptive fountain, man-made lake.

Instruction of remote control

RGB gradient change illuminated in the first power on or press button “D” to turn on the light

Switch off/on the power each time,the color will be changed with following sequence:Red→green→blue→RGB→RGB gradient change slow→RGB gradient change fast→disco mode slow→disco mode fast→The speed is constantly changing on the flickering effect

Instructions of remote control

1)Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB

2)Continue pressing the button “B” to make the 3 group led change in 3 modes:

RGB gradient change

1)Disco mode

2)Blinking change

3)Pressing button “C” to adjust the speed of “A”and “B”

4)Pressing button “D” to switch on/off the led light

5)It will reset in 5 seconds after power off

6)The remote control can operate many led lights synchronously

Installation procedure

Screw the bracket into the wall

Mount the clip of the bracket into the hole of the light

Screw the detailed illustrations in the below pictures

Cautions

Work with AC12V, otherwise the light will be possibly damaged

This light should be installed not deeper than 50cm underwater

The power wire of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is in the water otherwise there is risk for water intrusion

The light should be in the water for the test of remote function or other functions, and don’t test it more than 3 minutes out of the water otherwise the light will be possibly damaged or caused disfunction. If the user is not available to test it in the water, then please shut off the light every 3 minutes to be cold for the new test.