Specifications

Embedded LED POOL LIGHT 18W :
-Waterproof IP68
-252LED / 350LED/ 558LED
-RGB Color , warm white/ cool white etc
- AC12v

 Embedded LED POOL Light specification :

 

Item No	Power	LED QTY	Volt	Size	Material
OL-EM280A-252	18W	252 LED	AC12V	280*160 mm	Glass+ABS
OL-EM280A-350	25W	350 LED
OL-EM280A-558	40W	558 LED
OL-EM290A-252	18W	252 LED	AC12V	290*150mm	Glass+ABS
OL-EM290A-354	25W	350 LED
OL-EM290A-558	40W	558 LED
OL-EM280B-252	18W	252 LED	AC12V	280*160mm	Glass+ABS
OL-EM280B-350	25W	350 LED
OL-EM280B-558	40W	558 LED

 

 

Embedded LED POOL LIGHT  features :

 

1. Single color or ( RGB 7 colors with remote control )

2. Epistar LED Chip from Taiwan

3. Remote control /Auto Control

4. Solid ABS plastic cover or  stainless steel cover

5. Comes with 1.5m cable

6. Structure: PAR56 + Housing

7. 100% expoxy filled,  complete sealing ;

8. Waterproof IP68

9. Easy installation and accembling

 

 

Embedded LED POOL LIGHT  - more views :

 

 

 

Embedded LED POOL LIGHT  Ageing testing :

 

 

 

Embedded LED POOL LIGHT  structure : PAR56 LED bulb + Housing 

 

 

 

 

 

 

Instructions of remote control

 

 

1) Continue pressing the button “A” to make the 3 group led change in 7 stages: Red→green→blue→red+green→red+blue→green+blue→RGB

2) Continue pressing the button “B” to make the 3 group led change in 3 modes:

-RGB gradient change   -Disco mode   -Blinking change

3) Pressing button “C” to adjust the speed of “A”and “B”

4)Pressing button “D” to switch on/off the led light

5) It will reset in 5 seconds after power off

6)The remote control can operate many led lights synchronously

 

Cautions - when testing and installation of Embedded LED POOL LIGHT  :

 

1.Work with AC12V, otherwise the light will be possibly damaged.

 

2.This light should be installed not deeper than 50cm underwater.

 

3.The power cable of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is under the water .

 

4.The light should be under the water for the test of remote function or other functions, and do not test it more than 10 minutes out of water, otherwise the light will be possibly damaged or disfunction caused. If the user is not available to test it under the water, then please shut off the light every 10 minutes for cooling to make the new test

 

Embedded LED POOL LIGHT Application : 

 

Embedded LED POOL LIGHT are widely used for the decoration lighting under water or any water view such as the swimming pool, fountain,man-made lake, water landscape etc

 

 

   * NEW DESIGN - Embedded LED POOL LIGHT 12x1W or 18x1W: