PES filter cartridge, buy High viscosity hydrophilic PES filter cartridge for beer/vaccine filtration on China Suppliers Mobile

Product Details

Specifications

High viscosity hydrophilic PES filter cartridge for beer/vaccine filtration
1.imported PES filter membrane
2.high quality

High viscosity hydrophilic PES filter catridge for beer/vaccine filtration

Imported PES filter membrane is adopted in the product as filter media. The product is produced by overall structure sweat welding. The filter element is produced through optimum filter membrane matching mode, thereby the product has higher pollutant containing ability and longer service life, which is suitable for terminal filtration of high viscosity material fluid.

1.The filter membrane is hydrophilic with absolute filtration accuracy

2. Low protein adsorption performance

3.High pollutant containing ability

4.Long service life and economic use

1.Sterile filtration of vaccine

2.Sterile filtration of blood products

3.Sterile filtration of raw material medicine, injections, infusion and other drugs

4.Beer filtration

Materials

Filter element material composition:

filter memebrane	PES filter membrane
diversion material	polypropylene(PP)
outer shell	polypropylene(PP)
seal ring	please see filter element modle selection table

Intergrity test:

aperture(um)	0.1	0.2	0.45	0.65
the lowest bubbling point in pure water(MPa)	≥0.48	≥0.34	≥0.23	≥0.14

Water flow images

Water flow capacity-pressure difference curve(10'' filter element)

Technical indicator

Main application technical indicators:

maximum operating temperature	85°c/0.1MPa
maximum operating pressure difference	0.42MPa/25°c
recommended operating pressure difference	0.1~0.2MPa/25°c
maximum back-pressure difference	0.2MPa/25°c
effective filtration are(10 inches)	≥0.6m²
forward online steam sterilization(135°c)	30min/time
disinfection by disinfection cabinet(121°c)	30min/time

Certifications

Quality assurance:

1.ISO9001: 2008 guaranteed quality management system

2.Traceability management system of each filter

3.Filter elements are flushed and pass integrity test before filter elements are left from the factory

4.The batch passes through bacterial challenge test for confirming 100% bacteria interception ability

Biological safety:

1.Biological Safety: The product materials comply with USP in-vivo VI-121 ℃ plastic biological response test

2.Endotoxin: <0.25EU/ml

3.Cleanliness: The product is in line with 2010 GMP requirements on injection of particles

4.Readily oxidizable substance: the substance should be in line with 2010 GMP test requirements of particle contents in injections after water rinsing for 2000ml

5.TOC/conductivity: after the product is flushed with 20L injection water at 25 ℃ (10"). It is in line with requirements of 2010 GMP on total organic carbon contents and conductivity in injection water.