PES filter cartridge, buy Suzhou factory Hydrophilic PES pleated filter catridge on China Suppliers Mobile

Product Details

Specifications

Suzhou factory Hydrophilic PES pleated filter catridge
1.imported PES filter membrane
2.high intercepting bacteria

Suzhou factory Hydrophilic PES pleated filter catridge

Imported doublelayer PES filter membrane is adopted in the product as filter media. The product is produced by overall structure sweat welding. It has excellent filtration performance and ability of completely intercepting bacteria.

1.The filter membrane is hydrophilic with absolute filtration accuracy

2.Low protein adsorption performance

3.Wide chemical compatibility

4.Extremely low precipitates

5.High strength design

1.Sterile filtration of vaccine

2.Sterile filtration of blood products

3.Sterile filtration of raw material medicine, injections, infusion and other drugs

4.Filtration of cell culture medium

Materials

Filter element material composition:

filter memebrane	PES filter membrane
diversion material	polyproplene(PP)
outer shell	polyproplene(PP)
seal ring	please see filter element modle selection table
center rod	polyproplene or 316L stainless steel

Intergrity test:

aperture(um)	0.1	0.2	0.45	0.65
the lowest bubbling point in pure water(MPa)	≥0.48	≥0.34	≥0.25	≥0.16

Water flow images

Water flow capacity-pressure difference curve(10'' filter element)

Technical indicator

Main application technical indicators:

maximum operating temperature	85°c/0.1MPa
maximum operating pressure difference	0.42MPa/25°c
recommended operating pressure difference	0.1~0.2MPa/25°c
maximum back-pressure difference	0.2MPa/25°c
effective filtration are(10 inches)	≥0.6m²
forward online steam sterilization(135°c)	30min/time
disinfection by disinfection cabinet(121°c)	30min/time

Certifications

Quality assurance:

1.ISO9001: 2008 guaranteed quality management system

2.Traceability management system of each filter

3.Filter elements are flushed and pass integrity test before filter elements are left from the factory

4.The batch passes through bacterial challenge test for confirming 100% bacteria interception ability

Biological safety:

1.Biological Safety: The product materials comply with USP in-vivo VI-121 ℃ plastic biological response test

2.Endotoxin: <0.25EU/ml

3.Cleanliness: The product is in line with 2010 GMP requirements on injection of particles

4.Readily oxidizable substance: the substance should be in line with 2010 GMP test requirements of particle contents in injections after water rinsing for 2000ml

5.TOC/conductivity: after the product is flushed with 20L injection water at 25 ℃ (10"). It is in line with requirements of 2010 GMP on total organic carbon contents and conductivity in injection water.