Chinese Yk43X/F/Y high pressure steam pressure reducing valve
USD $10 - $200 /Piece
Min.Order:1 Piece
Guangzhou Joto Valve & Pump Industry Co., Ltd.
Chinese Yk43X/F/Y high pressure steam pressure reducing valve is mainly used for gas piping, such as air, nitrogen, oxygen, hydrogen, liquefied petroleum gas, natural gas and other gases.
I.Main technical parameter and performance index |
Nominal pressure (Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
Shell test pressure (Mpa)* | 2.4 | 3.75 | 6.0 | 9.6 | 15.0 | 24 |
Seal test pressure (Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
Highest inlet pressure Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
Outlet pressure scope(Mpa) | 0.1-1.0 | 0.1-1.6 | 0.1-2.5 | 0.5-3.5 | 0.5-3.5 | 0.5-4.5 |
Pressure characteristic deviation(Mpa)P2P | GB12246-1989 | |||||
Discharge characteristic deviation(Mpa)P2G | GB12246-1989 | |||||
minimum differential pressure(Mpa) | 0.15 | 0.15 | 0.2 | 0.4 | 0.8 | 1.0 |
Leakage quantity | X/F(teflon/rubber ):O Y(hard Seal ):GB12245-1989 |
*: Shell experiment not including diaphragm, roof panel |
Main parts materials |
part nme | parts materials |
body Bonnet lower head | WCB/FCB* |
seat valve seat | 2Cr13/304* |
cylinder line | 2Cr13/25(hard plating)/304* |
Piston | 2Cr13/Cuprum Alloy /Cuprum Alloy * |
piston ring | alloy cast iron /Gathers the benzene to the position* |
Pilot seat Pilot Stem | 2Cr13/304* |
Diaphragm | 1Cr18Ni9Ti |
Main valve Spring | 50CrVA |
adjusting Spring | 60Si2Mn |
gasket (X/F) | rubber/teflon |
Pilot body Pilot Bonnet | 25/304* |
Discharge coefficient(Cv) |
DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 |
Cv | 1 | 2.5 | 4 | 6.5 | 9 | 16 | 25 | 36 | 64 | 100 | 140 | 250 | 400 | 570 | 780 | 1020 | 1500 |
out-form dimensions (PN1.6-4.0) | UNIT:mm |
DN | out-form dimensions | |||
L | H | Hl | ||
1.6/2.5MPa | 4.0MPa | |||
15 | 160 | 180 | 290 | 90 |
20 | 160 | 180 | 300 | 98 |
25 | 180 | 200 | 300 | 110 |
32 | 200 | 220 | 300 | 110 |
40 | 220 | 240 | 320 | 125 |
50 | 250 | 270 | 320 | 125 |
65 | 280 | 300 | 325 | 130 |
80 | 310 | 330 | 365 | 160 |
100 | 350 | 380 | 365 | 170 |
125 | 400 | 450 | 475 | 200 |
150 | 450 | 500 | 475 | 210 |
200 | 500 | 550 | 515 | 240 |
250 | 650 | 560 | 290 | |
300 | 800 | 705 | 335 | |
350 | 850 | 745 | 375 | |
400 | 900 | 780 | 405 | |
450 | 900 | 730 | 455 | |
500 | 950 | 835 | 465 |
out-form dimensions (PN6.4-16.0) | mm |
DN | out-form dimensions | |||
L | H | Hl | ||
6.4MPa | 10.0/16.0MPa | |||
15 | 180 | 180 | 300 | 100 |
20 | 180 | 200 | 310 | 105 |
25 | 200 | 220 | 31 | 120 |
32 | 220 | 230 | 310 | 120 |
40 | 240 | 240 | 335 | 135 |
50 | 270 | 300 | 335 | 135 |
65 | 300 | 340 | 340 | 140 |
80 | 330 | 360 | 380 | 170 |
100 | 380 | 380 | 185 | |
125 | 450 | 490 | 215 | |
150 | 500 | 490 | 225 | |
200 | 550 | 535 | 260 | |
250 | 650 | 580 | 310 | |
300 | 800 | 725 | 355 | |
350 | 850 | 765 | 395 | |
400 | 900 | 800 | 435 | |
500 | 950 | 855 | 495 |