Product Introduction

PA-92R PIR sensor adopts digital fuzzy logic infrared control system and Intelligent analysis algorithm; it can tell the interference signal and human movement signal to avoid fault alarm. Also it has temperature compensation and air flow technology to get used to the change of the environment. The device has the features of environmental-friendly, safety and easy installation. It can reflect the low voltage automatically to help the GSM alarm to send low voltage message to users. The product is suitable for housing estate, villa, factory, warehouse, office building and so on.

Technical Parameters

1. Adopts CMOS low-power consumption microprocessor

2. Low power consumption, the battery with a longer life

3. Built-in Millions of codes

4. Transfer digital wireless signals

5. Low voltage alert function

6. All-around automatic temperature compensation

7. Intelligent logic analysis to avoid fault alarm

8. Anti white light

9. Anti high frequency interference

Working Instruction

Activate battery (release signal)→ self-checking(30s)→working mode

Working mode: After 30s self-checking, the device enters into working state; During this period, the user can constantly test the height and angle of installation, adjust accordingly.

Coding operation: Make the alarm panel to be in coding state, then the detector will send wireless signal to alarm panel after activating the battery. Also please move your hand to trigger the device to alarm after self-testing, then it will sent the wireless signal to alarm panel.

Product Installation

In order to make the detector far away from the place where  temperate changes frequently and air flows fast, please don't put your detector near window, air conditioner, fluorescent lamp, heating apparatus, fridges, oven, stove, sunshine, etc. Also do not install 2 detectors in the same zone to avoid interference and fault alarm.

Product Testing (walking test):

A. After battery activation, the device will self-check 30 seconds and then enter into working s mode, pleas walking around in the detection zone from left to right or right to left), observing the LED's flashes, make sure the device is working normally

B. The LED indicator flashes once when detect the movement of human body

C. Adjust the height and the angle of the device to the best detection range

Detection Range Diagram